Skip to content

L
LoRaDriverSDK
Commit 7e9f4129 by zhanggf
Options

init

parents
Showing with 4822 additions and 0 deletions
CORE/core_cm3.c 0 → 100644
This diff is collapsed. Click to expand it.
CORE/core_cm3.h 0 → 100644
This diff is collapsed. Click to expand it.
STM32F10x_FWLib/inc/misc.h 0 → 100644
/**
******************************************************************************
* @file misc.h
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the miscellaneous
* firmware library functions (add-on to CMSIS functions).
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __MISC_H
#define __MISC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @addtogroup MISC
* @{
*/
/** @defgroup MISC_Exported_Types
* @{
*/
/**
* @brief NVIC Init Structure definition
*/
typedef struct
{
uint8_t NVIC_IRQChannel; /*!< Specifies the IRQ channel to be enabled or disabled.
This parameter can be a value of @ref IRQn_Type
(For the complete STM32 Devices IRQ Channels list, please
refer to stm32f10x.h file) */
uint8_t NVIC_IRQChannelPreemptionPriority; /*!< Specifies the pre-emption priority for the IRQ channel
specified in NVIC_IRQChannel. This parameter can be a value
between 0 and 15 as described in the table @ref NVIC_Priority_Table */
uint8_t NVIC_IRQChannelSubPriority; /*!< Specifies the subpriority level for the IRQ channel specified
in NVIC_IRQChannel. This parameter can be a value
between 0 and 15 as described in the table @ref NVIC_Priority_Table */
FunctionalState NVIC_IRQChannelCmd; /*!< Specifies whether the IRQ channel defined in NVIC_IRQChannel
will be enabled or disabled.
This parameter can be set either to ENABLE or DISABLE */
} NVIC_InitTypeDef;
/**
* @}
*/
/** @defgroup NVIC_Priority_Table
* @{
*/
/**
@code
The table below gives the allowed values of the pre-emption priority and subpriority according
to the Priority Grouping configuration performed by NVIC_PriorityGroupConfig function
============================================================================================================================
NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description
============================================================================================================================
NVIC_PriorityGroup_0 | 0 | 0-15 | 0 bits for pre-emption priority
| | | 4 bits for subpriority
----------------------------------------------------------------------------------------------------------------------------
NVIC_PriorityGroup_1 | 0-1 | 0-7 | 1 bits for pre-emption priority
| | | 3 bits for subpriority
----------------------------------------------------------------------------------------------------------------------------
NVIC_PriorityGroup_2 | 0-3 | 0-3 | 2 bits for pre-emption priority
| | | 2 bits for subpriority
----------------------------------------------------------------------------------------------------------------------------
NVIC_PriorityGroup_3 | 0-7 | 0-1 | 3 bits for pre-emption priority
| | | 1 bits for subpriority
----------------------------------------------------------------------------------------------------------------------------
NVIC_PriorityGroup_4 | 0-15 | 0 | 4 bits for pre-emption priority
| | | 0 bits for subpriority
============================================================================================================================
@endcode
*/
/**
* @}
*/
/** @defgroup MISC_Exported_Constants
* @{
*/
/** @defgroup Vector_Table_Base
* @{
*/
#define NVIC_VectTab_RAM ((uint32_t)0x20000000)
#define NVIC_VectTab_FLASH ((uint32_t)0x08000000)
#define IS_NVIC_VECTTAB(VECTTAB) (((VECTTAB) == NVIC_VectTab_RAM) || \
((VECTTAB) == NVIC_VectTab_FLASH))
/**
* @}
*/
/** @defgroup System_Low_Power
* @{
*/
#define NVIC_LP_SEVONPEND ((uint8_t)0x10)
#define NVIC_LP_SLEEPDEEP ((uint8_t)0x04)
#define NVIC_LP_SLEEPONEXIT ((uint8_t)0x02)
#define IS_NVIC_LP(LP) (((LP) == NVIC_LP_SEVONPEND) || \
((LP) == NVIC_LP_SLEEPDEEP) || \
((LP) == NVIC_LP_SLEEPONEXIT))
/**
* @}
*/
/** @defgroup Preemption_Priority_Group
* @{
*/
#define NVIC_PriorityGroup_0 ((uint32_t)0x700) /*!< 0 bits for pre-emption priority
4 bits for subpriority */
#define NVIC_PriorityGroup_1 ((uint32_t)0x600) /*!< 1 bits for pre-emption priority
3 bits for subpriority */
#define NVIC_PriorityGroup_2 ((uint32_t)0x500) /*!< 2 bits for pre-emption priority
2 bits for subpriority */
#define NVIC_PriorityGroup_3 ((uint32_t)0x400) /*!< 3 bits for pre-emption priority
1 bits for subpriority */
#define NVIC_PriorityGroup_4 ((uint32_t)0x300) /*!< 4 bits for pre-emption priority
0 bits for subpriority */
#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PriorityGroup_0) || \
((GROUP) == NVIC_PriorityGroup_1) || \
((GROUP) == NVIC_PriorityGroup_2) || \
((GROUP) == NVIC_PriorityGroup_3) || \
((GROUP) == NVIC_PriorityGroup_4))
#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
#define IS_NVIC_OFFSET(OFFSET) ((OFFSET) < 0x000FFFFF)
/**
* @}
*/
/** @defgroup SysTick_clock_source
* @{
*/
#define SysTick_CLKSource_HCLK_Div8 ((uint32_t)0xFFFFFFFB)
#define SysTick_CLKSource_HCLK ((uint32_t)0x00000004)
#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SysTick_CLKSource_HCLK) || \
((SOURCE) == SysTick_CLKSource_HCLK_Div8))
/**
* @}
*/
/**
* @}
*/
/** @defgroup MISC_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup MISC_Exported_Functions
* @{
*/
void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup);
void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct);
void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset);
void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState);
void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource);
#ifdef __cplusplus
}
#endif
#endif /* __MISC_H */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
STM32F10x_FWLib/inc/stm32f10x_bkp.h 0 → 100644
/**
******************************************************************************
* @file stm32f10x_bkp.h
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the BKP firmware
* library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_BKP_H
#define __STM32F10x_BKP_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @addtogroup BKP
* @{
*/
/** @defgroup BKP_Exported_Types
* @{
*/
/**
* @}
*/
/** @defgroup BKP_Exported_Constants
* @{
*/
/** @defgroup Tamper_Pin_active_level
* @{
*/
#define BKP_TamperPinLevel_High ((uint16_t)0x0000)
#define BKP_TamperPinLevel_Low ((uint16_t)0x0001)
#define IS_BKP_TAMPER_PIN_LEVEL(LEVEL) (((LEVEL) == BKP_TamperPinLevel_High) || \
((LEVEL) == BKP_TamperPinLevel_Low))
/**
* @}
*/
/** @defgroup RTC_output_source_to_output_on_the_Tamper_pin
* @{
*/
#define BKP_RTCOutputSource_None ((uint16_t)0x0000)
#define BKP_RTCOutputSource_CalibClock ((uint16_t)0x0080)
#define BKP_RTCOutputSource_Alarm ((uint16_t)0x0100)
#define BKP_RTCOutputSource_Second ((uint16_t)0x0300)
#define IS_BKP_RTC_OUTPUT_SOURCE(SOURCE) (((SOURCE) == BKP_RTCOutputSource_None) || \
((SOURCE) == BKP_RTCOutputSource_CalibClock) || \
((SOURCE) == BKP_RTCOutputSource_Alarm) || \
((SOURCE) == BKP_RTCOutputSource_Second))
/**
* @}
*/
/** @defgroup Data_Backup_Register
* @{
*/
#define BKP_DR1 ((uint16_t)0x0004)
#define BKP_DR2 ((uint16_t)0x0008)
#define BKP_DR3 ((uint16_t)0x000C)
#define BKP_DR4 ((uint16_t)0x0010)
#define BKP_DR5 ((uint16_t)0x0014)
#define BKP_DR6 ((uint16_t)0x0018)
#define BKP_DR7 ((uint16_t)0x001C)
#define BKP_DR8 ((uint16_t)0x0020)
#define BKP_DR9 ((uint16_t)0x0024)
#define BKP_DR10 ((uint16_t)0x0028)
#define BKP_DR11 ((uint16_t)0x0040)
#define BKP_DR12 ((uint16_t)0x0044)
#define BKP_DR13 ((uint16_t)0x0048)
#define BKP_DR14 ((uint16_t)0x004C)
#define BKP_DR15 ((uint16_t)0x0050)
#define BKP_DR16 ((uint16_t)0x0054)
#define BKP_DR17 ((uint16_t)0x0058)
#define BKP_DR18 ((uint16_t)0x005C)
#define BKP_DR19 ((uint16_t)0x0060)
#define BKP_DR20 ((uint16_t)0x0064)
#define BKP_DR21 ((uint16_t)0x0068)
#define BKP_DR22 ((uint16_t)0x006C)
#define BKP_DR23 ((uint16_t)0x0070)
#define BKP_DR24 ((uint16_t)0x0074)
#define BKP_DR25 ((uint16_t)0x0078)
#define BKP_DR26 ((uint16_t)0x007C)
#define BKP_DR27 ((uint16_t)0x0080)
#define BKP_DR28 ((uint16_t)0x0084)
#define BKP_DR29 ((uint16_t)0x0088)
#define BKP_DR30 ((uint16_t)0x008C)
#define BKP_DR31 ((uint16_t)0x0090)
#define BKP_DR32 ((uint16_t)0x0094)
#define BKP_DR33 ((uint16_t)0x0098)
#define BKP_DR34 ((uint16_t)0x009C)
#define BKP_DR35 ((uint16_t)0x00A0)
#define BKP_DR36 ((uint16_t)0x00A4)
#define BKP_DR37 ((uint16_t)0x00A8)
#define BKP_DR38 ((uint16_t)0x00AC)
#define BKP_DR39 ((uint16_t)0x00B0)
#define BKP_DR40 ((uint16_t)0x00B4)
#define BKP_DR41 ((uint16_t)0x00B8)
#define BKP_DR42 ((uint16_t)0x00BC)
#define IS_BKP_DR(DR) (((DR) == BKP_DR1) || ((DR) == BKP_DR2) || ((DR) == BKP_DR3) || \
((DR) == BKP_DR4) || ((DR) == BKP_DR5) || ((DR) == BKP_DR6) || \
((DR) == BKP_DR7) || ((DR) == BKP_DR8) || ((DR) == BKP_DR9) || \
((DR) == BKP_DR10) || ((DR) == BKP_DR11) || ((DR) == BKP_DR12) || \
((DR) == BKP_DR13) || ((DR) == BKP_DR14) || ((DR) == BKP_DR15) || \
((DR) == BKP_DR16) || ((DR) == BKP_DR17) || ((DR) == BKP_DR18) || \
((DR) == BKP_DR19) || ((DR) == BKP_DR20) || ((DR) == BKP_DR21) || \
((DR) == BKP_DR22) || ((DR) == BKP_DR23) || ((DR) == BKP_DR24) || \
((DR) == BKP_DR25) || ((DR) == BKP_DR26) || ((DR) == BKP_DR27) || \
((DR) == BKP_DR28) || ((DR) == BKP_DR29) || ((DR) == BKP_DR30) || \
((DR) == BKP_DR31) || ((DR) == BKP_DR32) || ((DR) == BKP_DR33) || \
((DR) == BKP_DR34) || ((DR) == BKP_DR35) || ((DR) == BKP_DR36) || \
((DR) == BKP_DR37) || ((DR) == BKP_DR38) || ((DR) == BKP_DR39) || \
((DR) == BKP_DR40) || ((DR) == BKP_DR41) || ((DR) == BKP_DR42))
#define IS_BKP_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x7F)
/**
* @}
*/
/**
* @}
*/
/** @defgroup BKP_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup BKP_Exported_Functions
* @{
*/
void BKP_DeInit(void);
void BKP_TamperPinLevelConfig(uint16_t BKP_TamperPinLevel);
void BKP_TamperPinCmd(FunctionalState NewState);
void BKP_ITConfig(FunctionalState NewState);
void BKP_RTCOutputConfig(uint16_t BKP_RTCOutputSource);
void BKP_SetRTCCalibrationValue(uint8_t CalibrationValue);
void BKP_WriteBackupRegister(uint16_t BKP_DR, uint16_t Data);
uint16_t BKP_ReadBackupRegister(uint16_t BKP_DR);
FlagStatus BKP_GetFlagStatus(void);
void BKP_ClearFlag(void);
ITStatus BKP_GetITStatus(void);
void BKP_ClearITPendingBit(void);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F10x_BKP_H */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
STM32F10x_FWLib/inc/stm32f10x_cec.h 0 → 100644
/**
******************************************************************************
* @file stm32f10x_cec.h
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the CEC firmware
* library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_CEC_H
#define __STM32F10x_CEC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @addtogroup CEC
* @{
*/
/** @defgroup CEC_Exported_Types
* @{
*/
/**
* @brief CEC Init structure definition
*/
typedef struct
{
uint16_t CEC_BitTimingMode; /*!< Configures the CEC Bit Timing Error Mode.
This parameter can be a value of @ref CEC_BitTiming_Mode */
uint16_t CEC_BitPeriodMode; /*!< Configures the CEC Bit Period Error Mode.
This parameter can be a value of @ref CEC_BitPeriod_Mode */
}CEC_InitTypeDef;
/**
* @}
*/
/** @defgroup CEC_Exported_Constants
* @{
*/
/** @defgroup CEC_BitTiming_Mode
* @{
*/
#define CEC_BitTimingStdMode ((uint16_t)0x00) /*!< Bit timing error Standard Mode */
#define CEC_BitTimingErrFreeMode CEC_CFGR_BTEM /*!< Bit timing error Free Mode */
#define IS_CEC_BIT_TIMING_ERROR_MODE(MODE) (((MODE) == CEC_BitTimingStdMode) || \
((MODE) == CEC_BitTimingErrFreeMode))
/**
* @}
*/
/** @defgroup CEC_BitPeriod_Mode
* @{
*/
#define CEC_BitPeriodStdMode ((uint16_t)0x00) /*!< Bit period error Standard Mode */
#define CEC_BitPeriodFlexibleMode CEC_CFGR_BPEM /*!< Bit period error Flexible Mode */
#define IS_CEC_BIT_PERIOD_ERROR_MODE(MODE) (((MODE) == CEC_BitPeriodStdMode) || \
((MODE) == CEC_BitPeriodFlexibleMode))
/**
* @}
*/
/** @defgroup CEC_interrupts_definition
* @{
*/
#define CEC_IT_TERR CEC_CSR_TERR
#define CEC_IT_TBTRF CEC_CSR_TBTRF
#define CEC_IT_RERR CEC_CSR_RERR
#define CEC_IT_RBTF CEC_CSR_RBTF
#define IS_CEC_GET_IT(IT) (((IT) == CEC_IT_TERR) || ((IT) == CEC_IT_TBTRF) || \
((IT) == CEC_IT_RERR) || ((IT) == CEC_IT_RBTF))
/**
* @}
*/
/** @defgroup CEC_Own_Address
* @{
*/
#define IS_CEC_ADDRESS(ADDRESS) ((ADDRESS) < 0x10)
/**
* @}
*/
/** @defgroup CEC_Prescaler
* @{
*/
#define IS_CEC_PRESCALER(PRESCALER) ((PRESCALER) <= 0x3FFF)
/**
* @}
*/
/** @defgroup CEC_flags_definition
* @{
*/
/**
* @brief ESR register flags
*/
#define CEC_FLAG_BTE ((uint32_t)0x10010000)
#define CEC_FLAG_BPE ((uint32_t)0x10020000)
#define CEC_FLAG_RBTFE ((uint32_t)0x10040000)
#define CEC_FLAG_SBE ((uint32_t)0x10080000)
#define CEC_FLAG_ACKE ((uint32_t)0x10100000)
#define CEC_FLAG_LINE ((uint32_t)0x10200000)
#define CEC_FLAG_TBTFE ((uint32_t)0x10400000)
/**
* @brief CSR register flags
*/
#define CEC_FLAG_TEOM ((uint32_t)0x00000002)
#define CEC_FLAG_TERR ((uint32_t)0x00000004)
#define CEC_FLAG_TBTRF ((uint32_t)0x00000008)
#define CEC_FLAG_RSOM ((uint32_t)0x00000010)
#define CEC_FLAG_REOM ((uint32_t)0x00000020)
#define CEC_FLAG_RERR ((uint32_t)0x00000040)
#define CEC_FLAG_RBTF ((uint32_t)0x00000080)
#define IS_CEC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFF03) == 0x00) && ((FLAG) != 0x00))
#define IS_CEC_GET_FLAG(FLAG) (((FLAG) == CEC_FLAG_BTE) || ((FLAG) == CEC_FLAG_BPE) || \
((FLAG) == CEC_FLAG_RBTFE) || ((FLAG)== CEC_FLAG_SBE) || \
((FLAG) == CEC_FLAG_ACKE) || ((FLAG) == CEC_FLAG_LINE) || \
((FLAG) == CEC_FLAG_TBTFE) || ((FLAG) == CEC_FLAG_TEOM) || \
((FLAG) == CEC_FLAG_TERR) || ((FLAG) == CEC_FLAG_TBTRF) || \
((FLAG) == CEC_FLAG_RSOM) || ((FLAG) == CEC_FLAG_REOM) || \
((FLAG) == CEC_FLAG_RERR) || ((FLAG) == CEC_FLAG_RBTF))
/**
* @}
*/
/**
* @}
*/
/** @defgroup CEC_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup CEC_Exported_Functions
* @{
*/
void CEC_DeInit(void);
void CEC_Init(CEC_InitTypeDef* CEC_InitStruct);
void CEC_Cmd(FunctionalState NewState);
void CEC_ITConfig(FunctionalState NewState);
void CEC_OwnAddressConfig(uint8_t CEC_OwnAddress);
void CEC_SetPrescaler(uint16_t CEC_Prescaler);
void CEC_SendDataByte(uint8_t Data);
uint8_t CEC_ReceiveDataByte(void);
void CEC_StartOfMessage(void);
void CEC_EndOfMessageCmd(FunctionalState NewState);
FlagStatus CEC_GetFlagStatus(uint32_t CEC_FLAG);
void CEC_ClearFlag(uint32_t CEC_FLAG);
ITStatus CEC_GetITStatus(uint8_t CEC_IT);
void CEC_ClearITPendingBit(uint16_t CEC_IT);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F10x_CEC_H */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
STM32F10x_FWLib/inc/stm32f10x_crc.h 0 → 100644
/**
******************************************************************************
* @file stm32f10x_crc.h
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the CRC firmware
* library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_CRC_H
#define __STM32F10x_CRC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @addtogroup CRC
* @{
*/
/** @defgroup CRC_Exported_Types
* @{
*/
/**
* @}
*/
/** @defgroup CRC_Exported_Constants
* @{
*/
/**
* @}
*/
/** @defgroup CRC_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup CRC_Exported_Functions
* @{
*/
void CRC_ResetDR(void);
uint32_t CRC_CalcCRC(uint32_t Data);
uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength);
uint32_t CRC_GetCRC(void);
void CRC_SetIDRegister(uint8_t IDValue);
uint8_t CRC_GetIDRegister(void);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F10x_CRC_H */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
STM32F10x_FWLib/inc/stm32f10x_dbgmcu.h 0 → 100644
/**
******************************************************************************
* @file stm32f10x_dbgmcu.h
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the DBGMCU
* firmware library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_DBGMCU_H
#define __STM32F10x_DBGMCU_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @addtogroup DBGMCU
* @{
*/
/** @defgroup DBGMCU_Exported_Types
* @{
*/
/**
* @}
*/
/** @defgroup DBGMCU_Exported_Constants
* @{
*/
#define DBGMCU_SLEEP ((uint32_t)0x00000001)
#define DBGMCU_STOP ((uint32_t)0x00000002)
#define DBGMCU_STANDBY ((uint32_t)0x00000004)
#define DBGMCU_IWDG_STOP ((uint32_t)0x00000100)
#define DBGMCU_WWDG_STOP ((uint32_t)0x00000200)
#define DBGMCU_TIM1_STOP ((uint32_t)0x00000400)
#define DBGMCU_TIM2_STOP ((uint32_t)0x00000800)
#define DBGMCU_TIM3_STOP ((uint32_t)0x00001000)
#define DBGMCU_TIM4_STOP ((uint32_t)0x00002000)
#define DBGMCU_CAN1_STOP ((uint32_t)0x00004000)
#define DBGMCU_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00008000)
#define DBGMCU_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00010000)
#define DBGMCU_TIM8_STOP ((uint32_t)0x00020000)
#define DBGMCU_TIM5_STOP ((uint32_t)0x00040000)
#define DBGMCU_TIM6_STOP ((uint32_t)0x00080000)
#define DBGMCU_TIM7_STOP ((uint32_t)0x00100000)
#define DBGMCU_CAN2_STOP ((uint32_t)0x00200000)
#define DBGMCU_TIM15_STOP ((uint32_t)0x00400000)
#define DBGMCU_TIM16_STOP ((uint32_t)0x00800000)
#define DBGMCU_TIM17_STOP ((uint32_t)0x01000000)
#define DBGMCU_TIM12_STOP ((uint32_t)0x02000000)
#define DBGMCU_TIM13_STOP ((uint32_t)0x04000000)
#define DBGMCU_TIM14_STOP ((uint32_t)0x08000000)
#define DBGMCU_TIM9_STOP ((uint32_t)0x10000000)
#define DBGMCU_TIM10_STOP ((uint32_t)0x20000000)
#define DBGMCU_TIM11_STOP ((uint32_t)0x40000000)
#define IS_DBGMCU_PERIPH(PERIPH) ((((PERIPH) & 0x800000F8) == 0x00) && ((PERIPH) != 0x00))
/**
* @}
*/
/** @defgroup DBGMCU_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup DBGMCU_Exported_Functions
* @{
*/
uint32_t DBGMCU_GetREVID(void);
uint32_t DBGMCU_GetDEVID(void);
void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F10x_DBGMCU_H */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
STM32F10x_FWLib/inc/stm32f10x_exti.h 0 → 100644
/**
******************************************************************************
* @file stm32f10x_exti.h
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the EXTI firmware
* library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_EXTI_H
#define __STM32F10x_EXTI_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @addtogroup EXTI
* @{
*/
/** @defgroup EXTI_Exported_Types
* @{
*/
/**
* @brief EXTI mode enumeration
*/
typedef enum
{
EXTI_Mode_Interrupt = 0x00,
EXTI_Mode_Event = 0x04
}EXTIMode_TypeDef;
#define IS_EXTI_MODE(MODE) (((MODE) == EXTI_Mode_Interrupt) || ((MODE) == EXTI_Mode_Event))
/**
* @brief EXTI Trigger enumeration
*/
typedef enum
{
EXTI_Trigger_Rising = 0x08,
EXTI_Trigger_Falling = 0x0C,
EXTI_Trigger_Rising_Falling = 0x10
}EXTITrigger_TypeDef;
#define IS_EXTI_TRIGGER(TRIGGER) (((TRIGGER) == EXTI_Trigger_Rising) || \
((TRIGGER) == EXTI_Trigger_Falling) || \
((TRIGGER) == EXTI_Trigger_Rising_Falling))
/**
* @brief EXTI Init Structure definition
*/
typedef struct
{
uint32_t EXTI_Line; /*!< Specifies the EXTI lines to be enabled or disabled.
This parameter can be any combination of @ref EXTI_Lines */
EXTIMode_TypeDef EXTI_Mode; /*!< Specifies the mode for the EXTI lines.
This parameter can be a value of @ref EXTIMode_TypeDef */
EXTITrigger_TypeDef EXTI_Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines.
This parameter can be a value of @ref EXTIMode_TypeDef */
FunctionalState EXTI_LineCmd; /*!< Specifies the new state of the selected EXTI lines.
This parameter can be set either to ENABLE or DISABLE */
}EXTI_InitTypeDef;
/**
* @}
*/
/** @defgroup EXTI_Exported_Constants
* @{
*/
/** @defgroup EXTI_Lines
* @{
*/
#define EXTI_Line0 ((uint32_t)0x00001) /*!< External interrupt line 0 */
#define EXTI_Line1 ((uint32_t)0x00002) /*!< External interrupt line 1 */
#define EXTI_Line2 ((uint32_t)0x00004) /*!< External interrupt line 2 */
#define EXTI_Line3 ((uint32_t)0x00008) /*!< External interrupt line 3 */
#define EXTI_Line4 ((uint32_t)0x00010) /*!< External interrupt line 4 */
#define EXTI_Line5 ((uint32_t)0x00020) /*!< External interrupt line 5 */
#define EXTI_Line6 ((uint32_t)0x00040) /*!< External interrupt line 6 */
#define EXTI_Line7 ((uint32_t)0x00080) /*!< External interrupt line 7 */
#define EXTI_Line8 ((uint32_t)0x00100) /*!< External interrupt line 8 */
#define EXTI_Line9 ((uint32_t)0x00200) /*!< External interrupt line 9 */
#define EXTI_Line10 ((uint32_t)0x00400) /*!< External interrupt line 10 */
#define EXTI_Line11 ((uint32_t)0x00800) /*!< External interrupt line 11 */
#define EXTI_Line12 ((uint32_t)0x01000) /*!< External interrupt line 12 */
#define EXTI_Line13 ((uint32_t)0x02000) /*!< External interrupt line 13 */
#define EXTI_Line14 ((uint32_t)0x04000) /*!< External interrupt line 14 */
#define EXTI_Line15 ((uint32_t)0x08000) /*!< External interrupt line 15 */
#define EXTI_Line16 ((uint32_t)0x10000) /*!< External interrupt line 16 Connected to the PVD Output */
#define EXTI_Line17 ((uint32_t)0x20000) /*!< External interrupt line 17 Connected to the RTC Alarm event */
#define EXTI_Line18 ((uint32_t)0x40000) /*!< External interrupt line 18 Connected to the USB Device/USB OTG FS
Wakeup from suspend event */
#define EXTI_Line19 ((uint32_t)0x80000) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */
#define IS_EXTI_LINE(LINE) ((((LINE) & (uint32_t)0xFFF00000) == 0x00) && ((LINE) != (uint16_t)0x00))
#define IS_GET_EXTI_LINE(LINE) (((LINE) == EXTI_Line0) || ((LINE) == EXTI_Line1) || \
((LINE) == EXTI_Line2) || ((LINE) == EXTI_Line3) || \
((LINE) == EXTI_Line4) || ((LINE) == EXTI_Line5) || \
((LINE) == EXTI_Line6) || ((LINE) == EXTI_Line7) || \
((LINE) == EXTI_Line8) || ((LINE) == EXTI_Line9) || \
((LINE) == EXTI_Line10) || ((LINE) == EXTI_Line11) || \
((LINE) == EXTI_Line12) || ((LINE) == EXTI_Line13) || \
((LINE) == EXTI_Line14) || ((LINE) == EXTI_Line15) || \
((LINE) == EXTI_Line16) || ((LINE) == EXTI_Line17) || \
((LINE) == EXTI_Line18) || ((LINE) == EXTI_Line19))
/**
* @}
*/
/**
* @}
*/
/** @defgroup EXTI_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup EXTI_Exported_Functions
* @{
*/
void EXTI_DeInit(void);
void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct);
void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct);
void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line);
FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line);
void EXTI_ClearFlag(uint32_t EXTI_Line);
ITStatus EXTI_GetITStatus(uint32_t EXTI_Line);
void EXTI_ClearITPendingBit(uint32_t EXTI_Line);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F10x_EXTI_H */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
STM32F10x_FWLib/inc/stm32f10x_iwdg.h 0 → 100644
/**
******************************************************************************
* @file stm32f10x_iwdg.h
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the IWDG
* firmware library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_IWDG_H
#define __STM32F10x_IWDG_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @addtogroup IWDG
* @{
*/
/** @defgroup IWDG_Exported_Types
* @{
*/
/**
* @}
*/
/** @defgroup IWDG_Exported_Constants
* @{
*/
/** @defgroup IWDG_WriteAccess
* @{
*/
#define IWDG_WriteAccess_Enable ((uint16_t)0x5555)
#define IWDG_WriteAccess_Disable ((uint16_t)0x0000)
#define IS_IWDG_WRITE_ACCESS(ACCESS) (((ACCESS) == IWDG_WriteAccess_Enable) || \
((ACCESS) == IWDG_WriteAccess_Disable))
/**
* @}
*/
/** @defgroup IWDG_prescaler
* @{
*/
#define IWDG_Prescaler_4 ((uint8_t)0x00)
#define IWDG_Prescaler_8 ((uint8_t)0x01)
#define IWDG_Prescaler_16 ((uint8_t)0x02)
#define IWDG_Prescaler_32 ((uint8_t)0x03)
#define IWDG_Prescaler_64 ((uint8_t)0x04)
#define IWDG_Prescaler_128 ((uint8_t)0x05)
#define IWDG_Prescaler_256 ((uint8_t)0x06)
#define IS_IWDG_PRESCALER(PRESCALER) (((PRESCALER) == IWDG_Prescaler_4) || \
((PRESCALER) == IWDG_Prescaler_8) || \
((PRESCALER) == IWDG_Prescaler_16) || \
((PRESCALER) == IWDG_Prescaler_32) || \
((PRESCALER) == IWDG_Prescaler_64) || \
((PRESCALER) == IWDG_Prescaler_128)|| \
((PRESCALER) == IWDG_Prescaler_256))
/**
* @}
*/
/** @defgroup IWDG_Flag
* @{
*/
#define IWDG_FLAG_PVU ((uint16_t)0x0001)
#define IWDG_FLAG_RVU ((uint16_t)0x0002)
#define IS_IWDG_FLAG(FLAG) (((FLAG) == IWDG_FLAG_PVU) || ((FLAG) == IWDG_FLAG_RVU))
#define IS_IWDG_RELOAD(RELOAD) ((RELOAD) <= 0xFFF)
/**
* @}
*/
/**
* @}
*/
/** @defgroup IWDG_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup IWDG_Exported_Functions
* @{
*/
void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess);
void IWDG_SetPrescaler(uint8_t IWDG_Prescaler);
void IWDG_SetReload(uint16_t Reload);
void IWDG_ReloadCounter(void);
void IWDG_Enable(void);
FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F10x_IWDG_H */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
STM32F10x_FWLib/inc/stm32f10x_pwr.h 0 → 100644
/**
******************************************************************************
* @file stm32f10x_pwr.h
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the PWR firmware
* library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_PWR_H
#define __STM32F10x_PWR_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @addtogroup PWR
* @{
*/
/** @defgroup PWR_Exported_Types
* @{
*/
/**
* @}
*/
/** @defgroup PWR_Exported_Constants
* @{
*/
/** @defgroup PVD_detection_level
* @{
*/
#define PWR_PVDLevel_2V2 ((uint32_t)0x00000000)
#define PWR_PVDLevel_2V3 ((uint32_t)0x00000020)
#define PWR_PVDLevel_2V4 ((uint32_t)0x00000040)
#define PWR_PVDLevel_2V5 ((uint32_t)0x00000060)
#define PWR_PVDLevel_2V6 ((uint32_t)0x00000080)
#define PWR_PVDLevel_2V7 ((uint32_t)0x000000A0)
#define PWR_PVDLevel_2V8 ((uint32_t)0x000000C0)
#define PWR_PVDLevel_2V9 ((uint32_t)0x000000E0)
#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLevel_2V2) || ((LEVEL) == PWR_PVDLevel_2V3)|| \
((LEVEL) == PWR_PVDLevel_2V4) || ((LEVEL) == PWR_PVDLevel_2V5)|| \
((LEVEL) == PWR_PVDLevel_2V6) || ((LEVEL) == PWR_PVDLevel_2V7)|| \
((LEVEL) == PWR_PVDLevel_2V8) || ((LEVEL) == PWR_PVDLevel_2V9))
/**
* @}
*/
/** @defgroup Regulator_state_is_STOP_mode
* @{
*/
#define PWR_Regulator_ON ((uint32_t)0x00000000)
#define PWR_Regulator_LowPower ((uint32_t)0x00000001)
#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_Regulator_ON) || \
((REGULATOR) == PWR_Regulator_LowPower))
/**
* @}
*/
/** @defgroup STOP_mode_entry
* @{
*/
#define PWR_STOPEntry_WFI ((uint8_t)0x01)
#define PWR_STOPEntry_WFE ((uint8_t)0x02)
#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPEntry_WFI) || ((ENTRY) == PWR_STOPEntry_WFE))
/**
* @}
*/
/** @defgroup PWR_Flag
* @{
*/
#define PWR_FLAG_WU ((uint32_t)0x00000001)
#define PWR_FLAG_SB ((uint32_t)0x00000002)
#define PWR_FLAG_PVDO ((uint32_t)0x00000004)
#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \
((FLAG) == PWR_FLAG_PVDO))
#define IS_PWR_CLEAR_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB))
/**
* @}
*/
/**
* @}
*/
/** @defgroup PWR_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup PWR_Exported_Functions
* @{
*/
void PWR_DeInit(void);
void PWR_BackupAccessCmd(FunctionalState NewState);
void PWR_PVDCmd(FunctionalState NewState);
void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel);
void PWR_WakeUpPinCmd(FunctionalState NewState);
void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry);
void PWR_EnterSTANDBYMode(void);
FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG);
void PWR_ClearFlag(uint32_t PWR_FLAG);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F10x_PWR_H */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
STM32F10x_FWLib/inc/stm32f10x_rtc.h 0 → 100644
/**
******************************************************************************
* @file stm32f10x_rtc.h
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the RTC firmware
* library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_RTC_H
#define __STM32F10x_RTC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @addtogroup RTC
* @{
*/
/** @defgroup RTC_Exported_Types
* @{
*/
/**
* @}
*/
/** @defgroup RTC_Exported_Constants
* @{
*/
/** @defgroup RTC_interrupts_define
* @{
*/
#define RTC_IT_OW ((uint16_t)0x0004) /*!< Overflow interrupt */
#define RTC_IT_ALR ((uint16_t)0x0002) /*!< Alarm interrupt */
#define RTC_IT_SEC ((uint16_t)0x0001) /*!< Second interrupt */
#define IS_RTC_IT(IT) ((((IT) & (uint16_t)0xFFF8) == 0x00) && ((IT) != 0x00))
#define IS_RTC_GET_IT(IT) (((IT) == RTC_IT_OW) || ((IT) == RTC_IT_ALR) || \
((IT) == RTC_IT_SEC))
/**
* @}
*/
/** @defgroup RTC_interrupts_flags
* @{
*/
#define RTC_FLAG_RTOFF ((uint16_t)0x0020) /*!< RTC Operation OFF flag */
#define RTC_FLAG_RSF ((uint16_t)0x0008) /*!< Registers Synchronized flag */
#define RTC_FLAG_OW ((uint16_t)0x0004) /*!< Overflow flag */
#define RTC_FLAG_ALR ((uint16_t)0x0002) /*!< Alarm flag */
#define RTC_FLAG_SEC ((uint16_t)0x0001) /*!< Second flag */
#define IS_RTC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFFF0) == 0x00) && ((FLAG) != 0x00))
#define IS_RTC_GET_FLAG(FLAG) (((FLAG) == RTC_FLAG_RTOFF) || ((FLAG) == RTC_FLAG_RSF) || \
((FLAG) == RTC_FLAG_OW) || ((FLAG) == RTC_FLAG_ALR) || \
((FLAG) == RTC_FLAG_SEC))
#define IS_RTC_PRESCALER(PRESCALER) ((PRESCALER) <= 0xFFFFF)
/**
* @}
*/
/**
* @}
*/
/** @defgroup RTC_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup RTC_Exported_Functions
* @{
*/
void RTC_ITConfig(uint16_t RTC_IT, FunctionalState NewState);
void RTC_EnterConfigMode(void);
void RTC_ExitConfigMode(void);
uint32_t RTC_GetCounter(void);
void RTC_SetCounter(uint32_t CounterValue);
void RTC_SetPrescaler(uint32_t PrescalerValue);
void RTC_SetAlarm(uint32_t AlarmValue);
uint32_t RTC_GetDivider(void);
void RTC_WaitForLastTask(void);
void RTC_WaitForSynchro(void);
FlagStatus RTC_GetFlagStatus(uint16_t RTC_FLAG);
void RTC_ClearFlag(uint16_t RTC_FLAG);
ITStatus RTC_GetITStatus(uint16_t RTC_IT);
void RTC_ClearITPendingBit(uint16_t RTC_IT);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F10x_RTC_H */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
STM32F10x_FWLib/inc/stm32f10x_wwdg.h 0 → 100644
/**
******************************************************************************
* @file stm32f10x_wwdg.h
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file contains all the functions prototypes for the WWDG firmware
* library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_WWDG_H
#define __STM32F10x_WWDG_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @addtogroup WWDG
* @{
*/
/** @defgroup WWDG_Exported_Types
* @{
*/
/**
* @}
*/
/** @defgroup WWDG_Exported_Constants
* @{
*/
/** @defgroup WWDG_Prescaler
* @{
*/
#define WWDG_Prescaler_1 ((uint32_t)0x00000000)
#define WWDG_Prescaler_2 ((uint32_t)0x00000080)
#define WWDG_Prescaler_4 ((uint32_t)0x00000100)
#define WWDG_Prescaler_8 ((uint32_t)0x00000180)
#define IS_WWDG_PRESCALER(PRESCALER) (((PRESCALER) == WWDG_Prescaler_1) || \
((PRESCALER) == WWDG_Prescaler_2) || \
((PRESCALER) == WWDG_Prescaler_4) || \
((PRESCALER) == WWDG_Prescaler_8))
#define IS_WWDG_WINDOW_VALUE(VALUE) ((VALUE) <= 0x7F)
#define IS_WWDG_COUNTER(COUNTER) (((COUNTER) >= 0x40) && ((COUNTER) <= 0x7F))
/**
* @}
*/
/**
* @}
*/
/** @defgroup WWDG_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup WWDG_Exported_Functions
* @{
*/
void WWDG_DeInit(void);
void WWDG_SetPrescaler(uint32_t WWDG_Prescaler);
void WWDG_SetWindowValue(uint8_t WindowValue);
void WWDG_EnableIT(void);
void WWDG_SetCounter(uint8_t Counter);
void WWDG_Enable(uint8_t Counter);
FlagStatus WWDG_GetFlagStatus(void);
void WWDG_ClearFlag(void);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F10x_WWDG_H */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
STM32F10x_FWLib/src/misc.c 0 → 100644
/**
******************************************************************************
* @file misc.c
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the miscellaneous firmware functions (add-on
* to CMSIS functions).
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "misc.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @defgroup MISC
* @brief MISC driver modules
* @{
*/
/** @defgroup MISC_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup MISC_Private_Defines
* @{
*/
#define AIRCR_VECTKEY_MASK ((uint32_t)0x05FA0000)
/**
* @}
*/
/** @defgroup MISC_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup MISC_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup MISC_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup MISC_Private_Functions
* @{
*/
/**
* @brief Configures the priority grouping: pre-emption priority and subpriority.
* @param NVIC_PriorityGroup: specifies the priority grouping bits length.
* This parameter can be one of the following values:
* @arg NVIC_PriorityGroup_0: 0 bits for pre-emption priority
* 4 bits for subpriority
* @arg NVIC_PriorityGroup_1: 1 bits for pre-emption priority
* 3 bits for subpriority
* @arg NVIC_PriorityGroup_2: 2 bits for pre-emption priority
* 2 bits for subpriority
* @arg NVIC_PriorityGroup_3: 3 bits for pre-emption priority
* 1 bits for subpriority
* @arg NVIC_PriorityGroup_4: 4 bits for pre-emption priority
* 0 bits for subpriority
* @retval None
*/
void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup)
{
/* Check the parameters */
assert_param(IS_NVIC_PRIORITY_GROUP(NVIC_PriorityGroup));
/* Set the PRIGROUP[10:8] bits according to NVIC_PriorityGroup value */
SCB->AIRCR = AIRCR_VECTKEY_MASK | NVIC_PriorityGroup;
}
/**
* @brief Initializes the NVIC peripheral according to the specified
* parameters in the NVIC_InitStruct.
* @param NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure that contains
* the configuration information for the specified NVIC peripheral.
* @retval None
*/
void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct)
{
uint32_t tmppriority = 0x00, tmppre = 0x00, tmpsub = 0x0F;
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NVIC_InitStruct->NVIC_IRQChannelCmd));
assert_param(IS_NVIC_PREEMPTION_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority));
assert_param(IS_NVIC_SUB_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelSubPriority));
if (NVIC_InitStruct->NVIC_IRQChannelCmd != DISABLE)
{
/* Compute the Corresponding IRQ Priority --------------------------------*/
tmppriority = (0x700 - ((SCB->AIRCR) & (uint32_t)0x700))>> 0x08;
tmppre = (0x4 - tmppriority);
tmpsub = tmpsub >> tmppriority;
tmppriority = (uint32_t)NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority << tmppre;
tmppriority |= NVIC_InitStruct->NVIC_IRQChannelSubPriority & tmpsub;
tmppriority = tmppriority << 0x04;
NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel] = tmppriority;
/* Enable the Selected IRQ Channels --------------------------------------*/
NVIC->ISER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] =
(uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
}
else
{
/* Disable the Selected IRQ Channels -------------------------------------*/
NVIC->ICER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] =
(uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
}
}
/**
* @brief Sets the vector table location and Offset.
* @param NVIC_VectTab: specifies if the vector table is in RAM or FLASH memory.
* This parameter can be one of the following values:
* @arg NVIC_VectTab_RAM
* @arg NVIC_VectTab_FLASH
* @param Offset: Vector Table base offset field. This value must be a multiple
* of 0x200.
* @retval None
*/
void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset)
{
/* Check the parameters */
assert_param(IS_NVIC_VECTTAB(NVIC_VectTab));
assert_param(IS_NVIC_OFFSET(Offset));
SCB->VTOR = NVIC_VectTab | (Offset & (uint32_t)0x1FFFFF80);
}
/**
* @brief Selects the condition for the system to enter low power mode.
* @param LowPowerMode: Specifies the new mode for the system to enter low power mode.
* This parameter can be one of the following values:
* @arg NVIC_LP_SEVONPEND
* @arg NVIC_LP_SLEEPDEEP
* @arg NVIC_LP_SLEEPONEXIT
* @param NewState: new state of LP condition. This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_NVIC_LP(LowPowerMode));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
SCB->SCR |= LowPowerMode;
}
else
{
SCB->SCR &= (uint32_t)(~(uint32_t)LowPowerMode);
}
}
/**
* @brief Configures the SysTick clock source.
* @param SysTick_CLKSource: specifies the SysTick clock source.
* This parameter can be one of the following values:
* @arg SysTick_CLKSource_HCLK_Div8: AHB clock divided by 8 selected as SysTick clock source.
* @arg SysTick_CLKSource_HCLK: AHB clock selected as SysTick clock source.
* @retval None
*/
void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource)
{
/* Check the parameters */
assert_param(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource));
if (SysTick_CLKSource == SysTick_CLKSource_HCLK)
{
SysTick->CTRL |= SysTick_CLKSource_HCLK;
}
else
{
SysTick->CTRL &= SysTick_CLKSource_HCLK_Div8;
}
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
STM32F10x_FWLib/src/stm32f10x_bkp.c 0 → 100644
/**
******************************************************************************
* @file stm32f10x_bkp.c
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the BKP firmware functions.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_bkp.h"
#include "stm32f10x_rcc.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @defgroup BKP
* @brief BKP driver modules
* @{
*/
/** @defgroup BKP_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup BKP_Private_Defines
* @{
*/
/* ------------ BKP registers bit address in the alias region --------------- */
#define BKP_OFFSET (BKP_BASE - PERIPH_BASE)
/* --- CR Register ----*/
/* Alias word address of TPAL bit */
#define CR_OFFSET (BKP_OFFSET + 0x30)
#define TPAL_BitNumber 0x01
#define CR_TPAL_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPAL_BitNumber * 4))
/* Alias word address of TPE bit */
#define TPE_BitNumber 0x00
#define CR_TPE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPE_BitNumber * 4))
/* --- CSR Register ---*/
/* Alias word address of TPIE bit */
#define CSR_OFFSET (BKP_OFFSET + 0x34)
#define TPIE_BitNumber 0x02
#define CSR_TPIE_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TPIE_BitNumber * 4))
/* Alias word address of TIF bit */
#define TIF_BitNumber 0x09
#define CSR_TIF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TIF_BitNumber * 4))
/* Alias word address of TEF bit */
#define TEF_BitNumber 0x08
#define CSR_TEF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TEF_BitNumber * 4))
/* ---------------------- BKP registers bit mask ------------------------ */
/* RTCCR register bit mask */
#define RTCCR_CAL_MASK ((uint16_t)0xFF80)
#define RTCCR_MASK ((uint16_t)0xFC7F)
/**
* @}
*/
/** @defgroup BKP_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup BKP_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup BKP_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup BKP_Private_Functions
* @{
*/
/**
* @brief Deinitializes the BKP peripheral registers to their default reset values.
* @param None
* @retval None
*/
void BKP_DeInit(void)
{
RCC_BackupResetCmd(ENABLE);
RCC_BackupResetCmd(DISABLE);
}
/**
* @brief Configures the Tamper Pin active level.
* @param BKP_TamperPinLevel: specifies the Tamper Pin active level.
* This parameter can be one of the following values:
* @arg BKP_TamperPinLevel_High: Tamper pin active on high level
* @arg BKP_TamperPinLevel_Low: Tamper pin active on low level
* @retval None
*/
void BKP_TamperPinLevelConfig(uint16_t BKP_TamperPinLevel)
{
/* Check the parameters */
assert_param(IS_BKP_TAMPER_PIN_LEVEL(BKP_TamperPinLevel));
*(__IO uint32_t *) CR_TPAL_BB = BKP_TamperPinLevel;
}
/**
* @brief Enables or disables the Tamper Pin activation.
* @param NewState: new state of the Tamper Pin activation.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void BKP_TamperPinCmd(FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NewState));
*(__IO uint32_t *) CR_TPE_BB = (uint32_t)NewState;
}
/**
* @brief Enables or disables the Tamper Pin Interrupt.
* @param NewState: new state of the Tamper Pin Interrupt.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void BKP_ITConfig(FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NewState));
*(__IO uint32_t *) CSR_TPIE_BB = (uint32_t)NewState;
}
/**
* @brief Select the RTC output source to output on the Tamper pin.
* @param BKP_RTCOutputSource: specifies the RTC output source.
* This parameter can be one of the following values:
* @arg BKP_RTCOutputSource_None: no RTC output on the Tamper pin.
* @arg BKP_RTCOutputSource_CalibClock: output the RTC clock with frequency
* divided by 64 on the Tamper pin.
* @arg BKP_RTCOutputSource_Alarm: output the RTC Alarm pulse signal on
* the Tamper pin.
* @arg BKP_RTCOutputSource_Second: output the RTC Second pulse signal on
* the Tamper pin.
* @retval None
*/
void BKP_RTCOutputConfig(uint16_t BKP_RTCOutputSource)
{
uint16_t tmpreg = 0;
/* Check the parameters */
assert_param(IS_BKP_RTC_OUTPUT_SOURCE(BKP_RTCOutputSource));
tmpreg = BKP->RTCCR;
/* Clear CCO, ASOE and ASOS bits */
tmpreg &= RTCCR_MASK;
/* Set CCO, ASOE and ASOS bits according to BKP_RTCOutputSource value */
tmpreg |= BKP_RTCOutputSource;
/* Store the new value */
BKP->RTCCR = tmpreg;
}
/**
* @brief Sets RTC Clock Calibration value.
* @param CalibrationValue: specifies the RTC Clock Calibration value.
* This parameter must be a number between 0 and 0x7F.
* @retval None
*/
void BKP_SetRTCCalibrationValue(uint8_t CalibrationValue)
{
uint16_t tmpreg = 0;
/* Check the parameters */
assert_param(IS_BKP_CALIBRATION_VALUE(CalibrationValue));
tmpreg = BKP->RTCCR;
/* Clear CAL[6:0] bits */
tmpreg &= RTCCR_CAL_MASK;
/* Set CAL[6:0] bits according to CalibrationValue value */
tmpreg |= CalibrationValue;
/* Store the new value */
BKP->RTCCR = tmpreg;
}
/**
* @brief Writes user data to the specified Data Backup Register.
* @param BKP_DR: specifies the Data Backup Register.
* This parameter can be BKP_DRx where x:[1, 42]
* @param Data: data to write
* @retval None
*/
void BKP_WriteBackupRegister(uint16_t BKP_DR, uint16_t Data)
{
__IO uint32_t tmp = 0;
/* Check the parameters */
assert_param(IS_BKP_DR(BKP_DR));
tmp = (uint32_t)BKP_BASE;
tmp += BKP_DR;
*(__IO uint32_t *) tmp = Data;
}
/**
* @brief Reads data from the specified Data Backup Register.
* @param BKP_DR: specifies the Data Backup Register.
* This parameter can be BKP_DRx where x:[1, 42]
* @retval The content of the specified Data Backup Register
*/
uint16_t BKP_ReadBackupRegister(uint16_t BKP_DR)
{
__IO uint32_t tmp = 0;
/* Check the parameters */
assert_param(IS_BKP_DR(BKP_DR));
tmp = (uint32_t)BKP_BASE;
tmp += BKP_DR;
return (*(__IO uint16_t *) tmp);
}
/**
* @brief Checks whether the Tamper Pin Event flag is set or not.
* @param None
* @retval The new state of the Tamper Pin Event flag (SET or RESET).
*/
FlagStatus BKP_GetFlagStatus(void)
{
return (FlagStatus)(*(__IO uint32_t *) CSR_TEF_BB);
}
/**
* @brief Clears Tamper Pin Event pending flag.
* @param None
* @retval None
*/
void BKP_ClearFlag(void)
{
/* Set CTE bit to clear Tamper Pin Event flag */
BKP->CSR |= BKP_CSR_CTE;
}
/**
* @brief Checks whether the Tamper Pin Interrupt has occurred or not.
* @param None
* @retval The new state of the Tamper Pin Interrupt (SET or RESET).
*/
ITStatus BKP_GetITStatus(void)
{
return (ITStatus)(*(__IO uint32_t *) CSR_TIF_BB);
}
/**
* @brief Clears Tamper Pin Interrupt pending bit.
* @param None
* @retval None
*/
void BKP_ClearITPendingBit(void)
{
/* Set CTI bit to clear Tamper Pin Interrupt pending bit */
BKP->CSR |= BKP_CSR_CTI;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
STM32F10x_FWLib/src/stm32f10x_crc.c 0 → 100644
/**
******************************************************************************
* @file stm32f10x_crc.c
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the CRC firmware functions.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_crc.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @defgroup CRC
* @brief CRC driver modules
* @{
*/
/** @defgroup CRC_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup CRC_Private_Defines
* @{
*/
/**
* @}
*/
/** @defgroup CRC_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup CRC_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup CRC_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup CRC_Private_Functions
* @{
*/
/**
* @brief Resets the CRC Data register (DR).
* @param None
* @retval None
*/
void CRC_ResetDR(void)
{
/* Reset CRC generator */
CRC->CR = CRC_CR_RESET;
}
/**
* @brief Computes the 32-bit CRC of a given data word(32-bit).
* @param Data: data word(32-bit) to compute its CRC
* @retval 32-bit CRC
*/
uint32_t CRC_CalcCRC(uint32_t Data)
{
CRC->DR = Data;
return (CRC->DR);
}
/**
* @brief Computes the 32-bit CRC of a given buffer of data word(32-bit).
* @param pBuffer: pointer to the buffer containing the data to be computed
* @param BufferLength: length of the buffer to be computed
* @retval 32-bit CRC
*/
uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength)
{
uint32_t index = 0;
for(index = 0; index < BufferLength; index++)
{
CRC->DR = pBuffer[index];
}
return (CRC->DR);
}
/**
* @brief Returns the current CRC value.
* @param None
* @retval 32-bit CRC
*/
uint32_t CRC_GetCRC(void)
{
return (CRC->DR);
}
/**
* @brief Stores a 8-bit data in the Independent Data(ID) register.
* @param IDValue: 8-bit value to be stored in the ID register
* @retval None
*/
void CRC_SetIDRegister(uint8_t IDValue)
{
CRC->IDR = IDValue;
}
/**
* @brief Returns the 8-bit data stored in the Independent Data(ID) register
* @param None
* @retval 8-bit value of the ID register
*/
uint8_t CRC_GetIDRegister(void)
{
return (CRC->IDR);
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
STM32F10x_FWLib/src/stm32f10x_dbgmcu.c 0 → 100644
/**
******************************************************************************
* @file stm32f10x_dbgmcu.c
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the DBGMCU firmware functions.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_dbgmcu.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @defgroup DBGMCU
* @brief DBGMCU driver modules
* @{
*/
/** @defgroup DBGMCU_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup DBGMCU_Private_Defines
* @{
*/
#define IDCODE_DEVID_MASK ((uint32_t)0x00000FFF)
/**
* @}
*/
/** @defgroup DBGMCU_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup DBGMCU_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup DBGMCU_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup DBGMCU_Private_Functions
* @{
*/
/**
* @brief Returns the device revision identifier.
* @param None
* @retval Device revision identifier
*/
uint32_t DBGMCU_GetREVID(void)
{
return(DBGMCU->IDCODE >> 16);
}
/**
* @brief Returns the device identifier.
* @param None
* @retval Device identifier
*/
uint32_t DBGMCU_GetDEVID(void)
{
return(DBGMCU->IDCODE & IDCODE_DEVID_MASK);
}
/**
* @brief Configures the specified peripheral and low power mode behavior
* when the MCU under Debug mode.
* @param DBGMCU_Periph: specifies the peripheral and low power mode.
* This parameter can be any combination of the following values:
* @arg DBGMCU_SLEEP: Keep debugger connection during SLEEP mode
* @arg DBGMCU_STOP: Keep debugger connection during STOP mode
* @arg DBGMCU_STANDBY: Keep debugger connection during STANDBY mode
* @arg DBGMCU_IWDG_STOP: Debug IWDG stopped when Core is halted
* @arg DBGMCU_WWDG_STOP: Debug WWDG stopped when Core is halted
* @arg DBGMCU_TIM1_STOP: TIM1 counter stopped when Core is halted
* @arg DBGMCU_TIM2_STOP: TIM2 counter stopped when Core is halted
* @arg DBGMCU_TIM3_STOP: TIM3 counter stopped when Core is halted
* @arg DBGMCU_TIM4_STOP: TIM4 counter stopped when Core is halted
* @arg DBGMCU_CAN1_STOP: Debug CAN2 stopped when Core is halted
* @arg DBGMCU_I2C1_SMBUS_TIMEOUT: I2C1 SMBUS timeout mode stopped when Core is halted
* @arg DBGMCU_I2C2_SMBUS_TIMEOUT: I2C2 SMBUS timeout mode stopped when Core is halted
* @arg DBGMCU_TIM5_STOP: TIM5 counter stopped when Core is halted
* @arg DBGMCU_TIM6_STOP: TIM6 counter stopped when Core is halted
* @arg DBGMCU_TIM7_STOP: TIM7 counter stopped when Core is halted
* @arg DBGMCU_TIM8_STOP: TIM8 counter stopped when Core is halted
* @arg DBGMCU_CAN2_STOP: Debug CAN2 stopped when Core is halted
* @arg DBGMCU_TIM15_STOP: TIM15 counter stopped when Core is halted
* @arg DBGMCU_TIM16_STOP: TIM16 counter stopped when Core is halted
* @arg DBGMCU_TIM17_STOP: TIM17 counter stopped when Core is halted
* @arg DBGMCU_TIM9_STOP: TIM9 counter stopped when Core is halted
* @arg DBGMCU_TIM10_STOP: TIM10 counter stopped when Core is halted
* @arg DBGMCU_TIM11_STOP: TIM11 counter stopped when Core is halted
* @arg DBGMCU_TIM12_STOP: TIM12 counter stopped when Core is halted
* @arg DBGMCU_TIM13_STOP: TIM13 counter stopped when Core is halted
* @arg DBGMCU_TIM14_STOP: TIM14 counter stopped when Core is halted
* @param NewState: new state of the specified peripheral in Debug mode.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_DBGMCU_PERIPH(DBGMCU_Periph));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
DBGMCU->CR |= DBGMCU_Periph;
}
else
{
DBGMCU->CR &= ~DBGMCU_Periph;
}
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
STM32F10x_FWLib/src/stm32f10x_exti.c 0 → 100644
/**
******************************************************************************
* @file stm32f10x_exti.c
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the EXTI firmware functions.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_exti.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @defgroup EXTI
* @brief EXTI driver modules
* @{
*/
/** @defgroup EXTI_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup EXTI_Private_Defines
* @{
*/
#define EXTI_LINENONE ((uint32_t)0x00000) /* No interrupt selected */
/**
* @}
*/
/** @defgroup EXTI_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup EXTI_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup EXTI_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup EXTI_Private_Functions
* @{
*/
/**
* @brief Deinitializes the EXTI peripheral registers to their default reset values.
* @param None
* @retval None
*/
void EXTI_DeInit(void)
{
EXTI->IMR = 0x00000000;
EXTI->EMR = 0x00000000;
EXTI->RTSR = 0x00000000;
EXTI->FTSR = 0x00000000;
EXTI->PR = 0x000FFFFF;
}
/**
* @brief Initializes the EXTI peripheral according to the specified
* parameters in the EXTI_InitStruct.
* @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure
* that contains the configuration information for the EXTI peripheral.
* @retval None
*/
void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct)
{
uint32_t tmp = 0;
/* Check the parameters */
assert_param(IS_EXTI_MODE(EXTI_InitStruct->EXTI_Mode));
assert_param(IS_EXTI_TRIGGER(EXTI_InitStruct->EXTI_Trigger));
assert_param(IS_EXTI_LINE(EXTI_InitStruct->EXTI_Line));
assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->EXTI_LineCmd));
tmp = (uint32_t)EXTI_BASE;
if (EXTI_InitStruct->EXTI_LineCmd != DISABLE)
{
/* Clear EXTI line configuration */
EXTI->IMR &= ~EXTI_InitStruct->EXTI_Line;
EXTI->EMR &= ~EXTI_InitStruct->EXTI_Line;
tmp += EXTI_InitStruct->EXTI_Mode;
*(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line;
/* Clear Rising Falling edge configuration */
EXTI->RTSR &= ~EXTI_InitStruct->EXTI_Line;
EXTI->FTSR &= ~EXTI_InitStruct->EXTI_Line;
/* Select the trigger for the selected external interrupts */
if (EXTI_InitStruct->EXTI_Trigger == EXTI_Trigger_Rising_Falling)
{
/* Rising Falling edge */
EXTI->RTSR |= EXTI_InitStruct->EXTI_Line;
EXTI->FTSR |= EXTI_InitStruct->EXTI_Line;
}
else
{
tmp = (uint32_t)EXTI_BASE;
tmp += EXTI_InitStruct->EXTI_Trigger;
*(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line;
}
}
else
{
tmp += EXTI_InitStruct->EXTI_Mode;
/* Disable the selected external lines */
*(__IO uint32_t *) tmp &= ~EXTI_InitStruct->EXTI_Line;
}
}
/**
* @brief Fills each EXTI_InitStruct member with its reset value.
* @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure which will
* be initialized.
* @retval None
*/
void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct)
{
EXTI_InitStruct->EXTI_Line = EXTI_LINENONE;
EXTI_InitStruct->EXTI_Mode = EXTI_Mode_Interrupt;
EXTI_InitStruct->EXTI_Trigger = EXTI_Trigger_Falling;
EXTI_InitStruct->EXTI_LineCmd = DISABLE;
}
/**
* @brief Generates a Software interrupt.
* @param EXTI_Line: specifies the EXTI lines to be enabled or disabled.
* This parameter can be any combination of EXTI_Linex where x can be (0..19).
* @retval None
*/
void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line)
{
/* Check the parameters */
assert_param(IS_EXTI_LINE(EXTI_Line));
EXTI->SWIER |= EXTI_Line;
}
/**
* @brief Checks whether the specified EXTI line flag is set or not.
* @param EXTI_Line: specifies the EXTI line flag to check.
* This parameter can be:
* @arg EXTI_Linex: External interrupt line x where x(0..19)
* @retval The new state of EXTI_Line (SET or RESET).
*/
FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line)
{
FlagStatus bitstatus = RESET;
/* Check the parameters */
assert_param(IS_GET_EXTI_LINE(EXTI_Line));
if ((EXTI->PR & EXTI_Line) != (uint32_t)RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
/**
* @brief Clears the EXTI's line pending flags.
* @param EXTI_Line: specifies the EXTI lines flags to clear.
* This parameter can be any combination of EXTI_Linex where x can be (0..19).
* @retval None
*/
void EXTI_ClearFlag(uint32_t EXTI_Line)
{
/* Check the parameters */
assert_param(IS_EXTI_LINE(EXTI_Line));
EXTI->PR = EXTI_Line;
}
/**
* @brief Checks whether the specified EXTI line is asserted or not.
* @param EXTI_Line: specifies the EXTI line to check.
* This parameter can be:
* @arg EXTI_Linex: External interrupt line x where x(0..19)
* @retval The new state of EXTI_Line (SET or RESET).
*/
ITStatus EXTI_GetITStatus(uint32_t EXTI_Line)
{
ITStatus bitstatus = RESET;
uint32_t enablestatus = 0;
/* Check the parameters */
assert_param(IS_GET_EXTI_LINE(EXTI_Line));
enablestatus = EXTI->IMR & EXTI_Line;
if (((EXTI->PR & EXTI_Line) != (uint32_t)RESET) && (enablestatus != (uint32_t)RESET))
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
/**
* @brief Clears the EXTI's line pending bits.
* @param EXTI_Line: specifies the EXTI lines to clear.
* This parameter can be any combination of EXTI_Linex where x can be (0..19).
* @retval None
*/
void EXTI_ClearITPendingBit(uint32_t EXTI_Line)
{
/* Check the parameters */
assert_param(IS_EXTI_LINE(EXTI_Line));
EXTI->PR = EXTI_Line;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
STM32F10x_FWLib/src/stm32f10x_iwdg.c 0 → 100644
/**
******************************************************************************
* @file stm32f10x_iwdg.c
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the IWDG firmware functions.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_iwdg.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @defgroup IWDG
* @brief IWDG driver modules
* @{
*/
/** @defgroup IWDG_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup IWDG_Private_Defines
* @{
*/
/* ---------------------- IWDG registers bit mask ----------------------------*/
/* KR register bit mask */
#define KR_KEY_Reload ((uint16_t)0xAAAA)
#define KR_KEY_Enable ((uint16_t)0xCCCC)
/**
* @}
*/
/** @defgroup IWDG_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup IWDG_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup IWDG_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup IWDG_Private_Functions
* @{
*/
/**
* @brief Enables or disables write access to IWDG_PR and IWDG_RLR registers.
* @param IWDG_WriteAccess: new state of write access to IWDG_PR and IWDG_RLR registers.
* This parameter can be one of the following values:
* @arg IWDG_WriteAccess_Enable: Enable write access to IWDG_PR and IWDG_RLR registers
* @arg IWDG_WriteAccess_Disable: Disable write access to IWDG_PR and IWDG_RLR registers
* @retval None
*/
void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess)
{
/* Check the parameters */
assert_param(IS_IWDG_WRITE_ACCESS(IWDG_WriteAccess));
IWDG->KR = IWDG_WriteAccess;
}
/**
* @brief Sets IWDG Prescaler value.
* @param IWDG_Prescaler: specifies the IWDG Prescaler value.
* This parameter can be one of the following values:
* @arg IWDG_Prescaler_4: IWDG prescaler set to 4
* @arg IWDG_Prescaler_8: IWDG prescaler set to 8
* @arg IWDG_Prescaler_16: IWDG prescaler set to 16
* @arg IWDG_Prescaler_32: IWDG prescaler set to 32
* @arg IWDG_Prescaler_64: IWDG prescaler set to 64
* @arg IWDG_Prescaler_128: IWDG prescaler set to 128
* @arg IWDG_Prescaler_256: IWDG prescaler set to 256
* @retval None
*/
void IWDG_SetPrescaler(uint8_t IWDG_Prescaler)
{
/* Check the parameters */
assert_param(IS_IWDG_PRESCALER(IWDG_Prescaler));
IWDG->PR = IWDG_Prescaler;
}
/**
* @brief Sets IWDG Reload value.
* @param Reload: specifies the IWDG Reload value.
* This parameter must be a number between 0 and 0x0FFF.
* @retval None
*/
void IWDG_SetReload(uint16_t Reload)
{
/* Check the parameters */
assert_param(IS_IWDG_RELOAD(Reload));
IWDG->RLR = Reload;
}
/**
* @brief Reloads IWDG counter with value defined in the reload register
* (write access to IWDG_PR and IWDG_RLR registers disabled).
* @param None
* @retval None
*/
void IWDG_ReloadCounter(void)
{
IWDG->KR = KR_KEY_Reload;
}
/**
* @brief Enables IWDG (write access to IWDG_PR and IWDG_RLR registers disabled).
* @param None
* @retval None
*/
void IWDG_Enable(void)
{
IWDG->KR = KR_KEY_Enable;
}
/**
* @brief Checks whether the specified IWDG flag is set or not.
* @param IWDG_FLAG: specifies the flag to check.
* This parameter can be one of the following values:
* @arg IWDG_FLAG_PVU: Prescaler Value Update on going
* @arg IWDG_FLAG_RVU: Reload Value Update on going
* @retval The new state of IWDG_FLAG (SET or RESET).
*/
FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG)
{
FlagStatus bitstatus = RESET;
/* Check the parameters */
assert_param(IS_IWDG_FLAG(IWDG_FLAG));
if ((IWDG->SR & IWDG_FLAG) != (uint32_t)RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
/* Return the flag status */
return bitstatus;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
STM32F10x_FWLib/src/stm32f10x_pwr.c 0 → 100644
/**
******************************************************************************
* @file stm32f10x_pwr.c
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the PWR firmware functions.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_pwr.h"
#include "stm32f10x_rcc.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @defgroup PWR
* @brief PWR driver modules
* @{
*/
/** @defgroup PWR_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup PWR_Private_Defines
* @{
*/
/* --------- PWR registers bit address in the alias region ---------- */
#define PWR_OFFSET (PWR_BASE - PERIPH_BASE)
/* --- CR Register ---*/
/* Alias word address of DBP bit */
#define CR_OFFSET (PWR_OFFSET + 0x00)
#define DBP_BitNumber 0x08
#define CR_DBP_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (DBP_BitNumber * 4))
/* Alias word address of PVDE bit */
#define PVDE_BitNumber 0x04
#define CR_PVDE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PVDE_BitNumber * 4))
/* --- CSR Register ---*/
/* Alias word address of EWUP bit */
#define CSR_OFFSET (PWR_OFFSET + 0x04)
#define EWUP_BitNumber 0x08
#define CSR_EWUP_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (EWUP_BitNumber * 4))
/* ------------------ PWR registers bit mask ------------------------ */
/* CR register bit mask */
#define CR_DS_MASK ((uint32_t)0xFFFFFFFC)
#define CR_PLS_MASK ((uint32_t)0xFFFFFF1F)
/**
* @}
*/
/** @defgroup PWR_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup PWR_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup PWR_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup PWR_Private_Functions
* @{
*/
/**
* @brief Deinitializes the PWR peripheral registers to their default reset values.
* @param None
* @retval None
*/
void PWR_DeInit(void)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, DISABLE);
}
/**
* @brief Enables or disables access to the RTC and backup registers.
* @param NewState: new state of the access to the RTC and backup registers.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void PWR_BackupAccessCmd(FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NewState));
*(__IO uint32_t *) CR_DBP_BB = (uint32_t)NewState;
}
/**
* @brief Enables or disables the Power Voltage Detector(PVD).
* @param NewState: new state of the PVD.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void PWR_PVDCmd(FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NewState));
*(__IO uint32_t *) CR_PVDE_BB = (uint32_t)NewState;
}
/**
* @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD).
* @param PWR_PVDLevel: specifies the PVD detection level
* This parameter can be one of the following values:
* @arg PWR_PVDLevel_2V2: PVD detection level set to 2.2V
* @arg PWR_PVDLevel_2V3: PVD detection level set to 2.3V
* @arg PWR_PVDLevel_2V4: PVD detection level set to 2.4V
* @arg PWR_PVDLevel_2V5: PVD detection level set to 2.5V
* @arg PWR_PVDLevel_2V6: PVD detection level set to 2.6V
* @arg PWR_PVDLevel_2V7: PVD detection level set to 2.7V
* @arg PWR_PVDLevel_2V8: PVD detection level set to 2.8V
* @arg PWR_PVDLevel_2V9: PVD detection level set to 2.9V
* @retval None
*/
void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel)
{
uint32_t tmpreg = 0;
/* Check the parameters */
assert_param(IS_PWR_PVD_LEVEL(PWR_PVDLevel));
tmpreg = PWR->CR;
/* Clear PLS[7:5] bits */
tmpreg &= CR_PLS_MASK;
/* Set PLS[7:5] bits according to PWR_PVDLevel value */
tmpreg |= PWR_PVDLevel;
/* Store the new value */
PWR->CR = tmpreg;
}
/**
* @brief Enables or disables the WakeUp Pin functionality.
* @param NewState: new state of the WakeUp Pin functionality.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void PWR_WakeUpPinCmd(FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NewState));
*(__IO uint32_t *) CSR_EWUP_BB = (uint32_t)NewState;
}
/**
* @brief Enters STOP mode.
* @param PWR_Regulator: specifies the regulator state in STOP mode.
* This parameter can be one of the following values:
* @arg PWR_Regulator_ON: STOP mode with regulator ON
* @arg PWR_Regulator_LowPower: STOP mode with regulator in low power mode
* @param PWR_STOPEntry: specifies if STOP mode in entered with WFI or WFE instruction.
* This parameter can be one of the following values:
* @arg PWR_STOPEntry_WFI: enter STOP mode with WFI instruction
* @arg PWR_STOPEntry_WFE: enter STOP mode with WFE instruction
* @retval None
*/
void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry)
{
uint32_t tmpreg = 0;
/* Check the parameters */
assert_param(IS_PWR_REGULATOR(PWR_Regulator));
assert_param(IS_PWR_STOP_ENTRY(PWR_STOPEntry));
/* Select the regulator state in STOP mode ---------------------------------*/
tmpreg = PWR->CR;
/* Clear PDDS and LPDS bits */
tmpreg &= CR_DS_MASK;
/* Set LPDS bit according to PWR_Regulator value */
tmpreg |= PWR_Regulator;
/* Store the new value */
PWR->CR = tmpreg;
/* Set SLEEPDEEP bit of Cortex System Control Register */
SCB->SCR |= SCB_SCR_SLEEPDEEP;
/* Select STOP mode entry --------------------------------------------------*/
if(PWR_STOPEntry == PWR_STOPEntry_WFI)
{
/* Request Wait For Interrupt */
__WFI();
}
else
{
/* Request Wait For Event */
__WFE();
}
/* Reset SLEEPDEEP bit of Cortex System Control Register */
SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP);
}
/**
* @brief Enters STANDBY mode.
* @param None
* @retval None
*/
void PWR_EnterSTANDBYMode(void)
{
/* Clear Wake-up flag */
PWR->CR |= PWR_CR_CWUF;
/* Select STANDBY mode */
PWR->CR |= PWR_CR_PDDS;
/* Set SLEEPDEEP bit of Cortex System Control Register */
SCB->SCR |= SCB_SCR_SLEEPDEEP;
/* This option is used to ensure that store operations are completed */
#if defined ( __CC_ARM )
__force_stores();
#endif
/* Request Wait For Interrupt */
__WFI();
}
/**
* @brief Checks whether the specified PWR flag is set or not.
* @param PWR_FLAG: specifies the flag to check.
* This parameter can be one of the following values:
* @arg PWR_FLAG_WU: Wake Up flag
* @arg PWR_FLAG_SB: StandBy flag
* @arg PWR_FLAG_PVDO: PVD Output
* @retval The new state of PWR_FLAG (SET or RESET).
*/
FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG)
{
FlagStatus bitstatus = RESET;
/* Check the parameters */
assert_param(IS_PWR_GET_FLAG(PWR_FLAG));
if ((PWR->CSR & PWR_FLAG) != (uint32_t)RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
/* Return the flag status */
return bitstatus;
}
/**
* @brief Clears the PWR's pending flags.
* @param PWR_FLAG: specifies the flag to clear.
* This parameter can be one of the following values:
* @arg PWR_FLAG_WU: Wake Up flag
* @arg PWR_FLAG_SB: StandBy flag
* @retval None
*/
void PWR_ClearFlag(uint32_t PWR_FLAG)
{
/* Check the parameters */
assert_param(IS_PWR_CLEAR_FLAG(PWR_FLAG));
PWR->CR |= PWR_FLAG << 2;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
STM32F10x_FWLib/src/stm32f10x_rtc.c 0 → 100644
/**
******************************************************************************
* @file stm32f10x_rtc.c
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the RTC firmware functions.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_rtc.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @defgroup RTC
* @brief RTC driver modules
* @{
*/
/** @defgroup RTC_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup RTC_Private_Defines
* @{
*/
#define RTC_LSB_MASK ((uint32_t)0x0000FFFF) /*!< RTC LSB Mask */
#define PRLH_MSB_MASK ((uint32_t)0x000F0000) /*!< RTC Prescaler MSB Mask */
/**
* @}
*/
/** @defgroup RTC_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup RTC_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup RTC_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup RTC_Private_Functions
* @{
*/
/**
* @brief Enables or disables the specified RTC interrupts.
* @param RTC_IT: specifies the RTC interrupts sources to be enabled or disabled.
* This parameter can be any combination of the following values:
* @arg RTC_IT_OW: Overflow interrupt
* @arg RTC_IT_ALR: Alarm interrupt
* @arg RTC_IT_SEC: Second interrupt
* @param NewState: new state of the specified RTC interrupts.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void RTC_ITConfig(uint16_t RTC_IT, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_RTC_IT(RTC_IT));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
RTC->CRH |= RTC_IT;
}
else
{
RTC->CRH &= (uint16_t)~RTC_IT;
}
}
/**
* @brief Enters the RTC configuration mode.
* @param None
* @retval None
*/
void RTC_EnterConfigMode(void)
{
/* Set the CNF flag to enter in the Configuration Mode */
RTC->CRL |= RTC_CRL_CNF;
}
/**
* @brief Exits from the RTC configuration mode.
* @param None
* @retval None
*/
void RTC_ExitConfigMode(void)
{
/* Reset the CNF flag to exit from the Configuration Mode */
RTC->CRL &= (uint16_t)~((uint16_t)RTC_CRL_CNF);
}
/**
* @brief Gets the RTC counter value.
* @param None
* @retval RTC counter value.
*/
uint32_t RTC_GetCounter(void)
{
uint16_t tmp = 0;
tmp = RTC->CNTL;
return (((uint32_t)RTC->CNTH << 16 ) | tmp) ;
}
/**
* @brief Sets the RTC counter value.
* @param CounterValue: RTC counter new value.
* @retval None
*/
void RTC_SetCounter(uint32_t CounterValue)
{
RTC_EnterConfigMode();
/* Set RTC COUNTER MSB word */
RTC->CNTH = CounterValue >> 16;
/* Set RTC COUNTER LSB word */
RTC->CNTL = (CounterValue & RTC_LSB_MASK);
RTC_ExitConfigMode();
}
/**
* @brief Sets the RTC prescaler value.
* @param PrescalerValue: RTC prescaler new value.
* @retval None
*/
void RTC_SetPrescaler(uint32_t PrescalerValue)
{
/* Check the parameters */
assert_param(IS_RTC_PRESCALER(PrescalerValue));
RTC_EnterConfigMode();
/* Set RTC PRESCALER MSB word */
RTC->PRLH = (PrescalerValue & PRLH_MSB_MASK) >> 16;
/* Set RTC PRESCALER LSB word */
RTC->PRLL = (PrescalerValue & RTC_LSB_MASK);
RTC_ExitConfigMode();
}
/**
* @brief Sets the RTC alarm value.
* @param AlarmValue: RTC alarm new value.
* @retval None
*/
void RTC_SetAlarm(uint32_t AlarmValue)
{
RTC_EnterConfigMode();
/* Set the ALARM MSB word */
RTC->ALRH = AlarmValue >> 16;
/* Set the ALARM LSB word */
RTC->ALRL = (AlarmValue & RTC_LSB_MASK);
RTC_ExitConfigMode();
}
/**
* @brief Gets the RTC divider value.
* @param None
* @retval RTC Divider value.
*/
uint32_t RTC_GetDivider(void)
{
uint32_t tmp = 0x00;
tmp = ((uint32_t)RTC->DIVH & (uint32_t)0x000F) << 16;
tmp |= RTC->DIVL;
return tmp;
}
/**
* @brief Waits until last write operation on RTC registers has finished.
* @note This function must be called before any write to RTC registers.
* @param None
* @retval None
*/
void RTC_WaitForLastTask(void)
{
/* Loop until RTOFF flag is set */
while ((RTC->CRL & RTC_FLAG_RTOFF) == (uint16_t)RESET)
{
}
}
/**
* @brief Waits until the RTC registers (RTC_CNT, RTC_ALR and RTC_PRL)
* are synchronized with RTC APB clock.
* @note This function must be called before any read operation after an APB reset
* or an APB clock stop.
* @param None
* @retval None
*/
void RTC_WaitForSynchro(void)
{
/* Clear RSF flag */
RTC->CRL &= (uint16_t)~RTC_FLAG_RSF;
/* Loop until RSF flag is set */
while ((RTC->CRL & RTC_FLAG_RSF) == (uint16_t)RESET)
{
}
}
/**
* @brief Checks whether the specified RTC flag is set or not.
* @param RTC_FLAG: specifies the flag to check.
* This parameter can be one the following values:
* @arg RTC_FLAG_RTOFF: RTC Operation OFF flag
* @arg RTC_FLAG_RSF: Registers Synchronized flag
* @arg RTC_FLAG_OW: Overflow flag
* @arg RTC_FLAG_ALR: Alarm flag
* @arg RTC_FLAG_SEC: Second flag
* @retval The new state of RTC_FLAG (SET or RESET).
*/
FlagStatus RTC_GetFlagStatus(uint16_t RTC_FLAG)
{
FlagStatus bitstatus = RESET;
/* Check the parameters */
assert_param(IS_RTC_GET_FLAG(RTC_FLAG));
if ((RTC->CRL & RTC_FLAG) != (uint16_t)RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
/**
* @brief Clears the RTC's pending flags.
* @param RTC_FLAG: specifies the flag to clear.
* This parameter can be any combination of the following values:
* @arg RTC_FLAG_RSF: Registers Synchronized flag. This flag is cleared only after
* an APB reset or an APB Clock stop.
* @arg RTC_FLAG_OW: Overflow flag
* @arg RTC_FLAG_ALR: Alarm flag
* @arg RTC_FLAG_SEC: Second flag
* @retval None
*/
void RTC_ClearFlag(uint16_t RTC_FLAG)
{
/* Check the parameters */
assert_param(IS_RTC_CLEAR_FLAG(RTC_FLAG));
/* Clear the corresponding RTC flag */
RTC->CRL &= (uint16_t)~RTC_FLAG;
}
/**
* @brief Checks whether the specified RTC interrupt has occurred or not.
* @param RTC_IT: specifies the RTC interrupts sources to check.
* This parameter can be one of the following values:
* @arg RTC_IT_OW: Overflow interrupt
* @arg RTC_IT_ALR: Alarm interrupt
* @arg RTC_IT_SEC: Second interrupt
* @retval The new state of the RTC_IT (SET or RESET).
*/
ITStatus RTC_GetITStatus(uint16_t RTC_IT)
{
ITStatus bitstatus = RESET;
/* Check the parameters */
assert_param(IS_RTC_GET_IT(RTC_IT));
bitstatus = (ITStatus)(RTC->CRL & RTC_IT);
if (((RTC->CRH & RTC_IT) != (uint16_t)RESET) && (bitstatus != (uint16_t)RESET))
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
/**
* @brief Clears the RTC's interrupt pending bits.
* @param RTC_IT: specifies the interrupt pending bit to clear.
* This parameter can be any combination of the following values:
* @arg RTC_IT_OW: Overflow interrupt
* @arg RTC_IT_ALR: Alarm interrupt
* @arg RTC_IT_SEC: Second interrupt
* @retval None
*/
void RTC_ClearITPendingBit(uint16_t RTC_IT)
{
/* Check the parameters */
assert_param(IS_RTC_IT(RTC_IT));
/* Clear the corresponding RTC pending bit */
RTC->CRL &= (uint16_t)~RTC_IT;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
STM32F10x_FWLib/src/stm32f10x_tim.c 0 → 100644
This source diff could not be displayed because it is too large. You can view the blob instead.
STM32F10x_FWLib/src/stm32f10x_wwdg.c 0 → 100644
/**
******************************************************************************
* @file stm32f10x_wwdg.c
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the WWDG firmware functions.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_wwdg.h"
#include "stm32f10x_rcc.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @defgroup WWDG
* @brief WWDG driver modules
* @{
*/
/** @defgroup WWDG_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup WWDG_Private_Defines
* @{
*/
/* ----------- WWDG registers bit address in the alias region ----------- */
#define WWDG_OFFSET (WWDG_BASE - PERIPH_BASE)
/* Alias word address of EWI bit */
#define CFR_OFFSET (WWDG_OFFSET + 0x04)
#define EWI_BitNumber 0x09
#define CFR_EWI_BB (PERIPH_BB_BASE + (CFR_OFFSET * 32) + (EWI_BitNumber * 4))
/* --------------------- WWDG registers bit mask ------------------------ */
/* CR register bit mask */
#define CR_WDGA_Set ((uint32_t)0x00000080)
/* CFR register bit mask */
#define CFR_WDGTB_Mask ((uint32_t)0xFFFFFE7F)
#define CFR_W_Mask ((uint32_t)0xFFFFFF80)
#define BIT_Mask ((uint8_t)0x7F)
/**
* @}
*/
/** @defgroup WWDG_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup WWDG_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup WWDG_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup WWDG_Private_Functions
* @{
*/
/**
* @brief Deinitializes the WWDG peripheral registers to their default reset values.
* @param None
* @retval None
*/
void WWDG_DeInit(void)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, DISABLE);
}
/**
* @brief Sets the WWDG Prescaler.
* @param WWDG_Prescaler: specifies the WWDG Prescaler.
* This parameter can be one of the following values:
* @arg WWDG_Prescaler_1: WWDG counter clock = (PCLK1/4096)/1
* @arg WWDG_Prescaler_2: WWDG counter clock = (PCLK1/4096)/2
* @arg WWDG_Prescaler_4: WWDG counter clock = (PCLK1/4096)/4
* @arg WWDG_Prescaler_8: WWDG counter clock = (PCLK1/4096)/8
* @retval None
*/
void WWDG_SetPrescaler(uint32_t WWDG_Prescaler)
{
uint32_t tmpreg = 0;
/* Check the parameters */
assert_param(IS_WWDG_PRESCALER(WWDG_Prescaler));
/* Clear WDGTB[1:0] bits */
tmpreg = WWDG->CFR & CFR_WDGTB_Mask;
/* Set WDGTB[1:0] bits according to WWDG_Prescaler value */
tmpreg |= WWDG_Prescaler;
/* Store the new value */
WWDG->CFR = tmpreg;
}
/**
* @brief Sets the WWDG window value.
* @param WindowValue: specifies the window value to be compared to the downcounter.
* This parameter value must be lower than 0x80.
* @retval None
*/
void WWDG_SetWindowValue(uint8_t WindowValue)
{
__IO uint32_t tmpreg = 0;
/* Check the parameters */
assert_param(IS_WWDG_WINDOW_VALUE(WindowValue));
/* Clear W[6:0] bits */
tmpreg = WWDG->CFR & CFR_W_Mask;
/* Set W[6:0] bits according to WindowValue value */
tmpreg |= WindowValue & (uint32_t) BIT_Mask;
/* Store the new value */
WWDG->CFR = tmpreg;
}
/**
* @brief Enables the WWDG Early Wakeup interrupt(EWI).
* @param None
* @retval None
*/
void WWDG_EnableIT(void)
{
*(__IO uint32_t *) CFR_EWI_BB = (uint32_t)ENABLE;
}
/**
* @brief Sets the WWDG counter value.
* @param Counter: specifies the watchdog counter value.
* This parameter must be a number between 0x40 and 0x7F.
* @retval None
*/
void WWDG_SetCounter(uint8_t Counter)
{
/* Check the parameters */
assert_param(IS_WWDG_COUNTER(Counter));
/* Write to T[6:0] bits to configure the counter value, no need to do
a read-modify-write; writing a 0 to WDGA bit does nothing */
WWDG->CR = Counter & BIT_Mask;
}
/**
* @brief Enables WWDG and load the counter value.
* @param Counter: specifies the watchdog counter value.
* This parameter must be a number between 0x40 and 0x7F.
* @retval None
*/
void WWDG_Enable(uint8_t Counter)
{
/* Check the parameters */
assert_param(IS_WWDG_COUNTER(Counter));
WWDG->CR = CR_WDGA_Set | Counter;
}
/**
* @brief Checks whether the Early Wakeup interrupt flag is set or not.
* @param None
* @retval The new state of the Early Wakeup interrupt flag (SET or RESET)
*/
FlagStatus WWDG_GetFlagStatus(void)
{
return (FlagStatus)(WWDG->SR);
}
/**
* @brief Clears Early Wakeup interrupt flag.
* @param None
* @retval None
*/
void WWDG_ClearFlag(void)
{
WWDG->SR = (uint32_t)RESET;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
SX127X/HAL/SX127x_hal.c 0 → 100644
#include "hal/sx127x_hal.h"
#include "stm32f10x_it.h"
/*
* LoRa sx1278/76驱动
*
* \version 1.0.0
* \date Dec 17 2019
* \author Specter
*/
#define RESET_IOPORT GPIOB
#define RESET_PIN GPIO_Pin_10
/*!
* SX1276 SPI definitions
*/
#define NSS_IOPORT GPIOA
#define NSS_PIN GPIO_Pin_4
#define SPI_INTERFACE SPI1
#define SPI_CLK RCC_APB2Periph_SPI1
#define SPI_PIN_SCK_PORT GPIOA
#define SPI_PIN_SCK_PORT_CLK RCC_APB2Periph_GPIOA
#define SPI_PIN_SCK GPIO_Pin_5
#define SPI_PIN_MISO_PORT GPIOA
#define SPI_PIN_MISO_PORT_CLK RCC_APB2Periph_GPIOA
#define SPI_PIN_MISO GPIO_Pin_6
#define SPI_PIN_MOSI_PORT GPIOA
#define SPI_PIN_MOSI_PORT_CLK RCC_APB2Periph_GPIOA
#define SPI_PIN_MOSI GPIO_Pin_7
/*!
* SX1276 DIO pins I/O definitions
*/
#define DIO0_IOPORT GPIOB
#define DIO0_PIN GPIO_Pin_0
#define DIO1_IOPORT GPIOB
#define DIO1_PIN GPIO_Pin_1
#define DIO3_IOPORT GPIOA
#define DIO3_PIN GPIO_Pin_1
#define DIO4_IOPORT GPIOA
#define DIO4_PIN GPIO_Pin_0
//软件延时函数，ms级别
void Soft_delay_ms(u16 time)
{
u16 i=0;
while(time--)
{
i=7950; //自己定义 调试时间：20141116
while(i--) ;
}
}
//spi初始化
static void SpiInit( void )
{
SPI_InitTypeDef SPI_InitStructure;
GPIO_InitTypeDef GPIO_InitStructure;
/* Enable peripheral clocks --------------------------------------------------*/
/* Enable SPIy clock and GPIO clock for SPIy */
RCC_APB2PeriphClockCmd( SPI_PIN_MISO_PORT_CLK | SPI_PIN_MOSI_PORT_CLK |
SPI_PIN_SCK_PORT_CLK, ENABLE );
RCC_APB2PeriphClockCmd( SPI_CLK, ENABLE );
/* GPIO configuration ------------------------------------------------------*/
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_InitStructure.GPIO_Pin = SPI_PIN_SCK;
GPIO_Init( SPI_PIN_SCK_PORT, &GPIO_InitStructure );
GPIO_InitStructure.GPIO_Pin = SPI_PIN_MOSI;
GPIO_Init( SPI_PIN_MOSI_PORT, &GPIO_InitStructure );
GPIO_InitStructure.GPIO_Pin = SPI_PIN_MISO;
GPIO_Init( SPI_PIN_MISO_PORT, &GPIO_InitStructure );
//禁用JTAG
RCC_APB2PeriphClockCmd( RCC_APB2Periph_AFIO, ENABLE );
GPIO_PinRemapConfig( GPIO_Remap_SWJ_JTAGDisable, ENABLE );
/* SPI_INTERFACE Config -------------------------------------------------------------*/
SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex;
SPI_InitStructure.SPI_Mode = SPI_Mode_Master;
SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b;
SPI_InitStructure.SPI_CPOL = SPI_CPOL_Low;
SPI_InitStructure.SPI_CPHA = SPI_CPHA_1Edge;
SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;
SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_8; // 72/8 MHz
SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
SPI_InitStructure.SPI_CRCPolynomial = 7;
SPI_Init( SPI_INTERFACE, &SPI_InitStructure );
SPI_Cmd( SPI_INTERFACE, ENABLE );
}
//SX127X相关初始化需要设置如下内容
//SPI片选设置为输出,并初始化SPI口
//复位角初始化为输出高电平
//DI00~5为输入（暂时只用到了DIO0和DIO1，如果不用硬件超时DIO1也可以不接）
void SX1276HALInit( void )
{
GPIO_InitTypeDef GPIO_InitStructure;
RCC_APB2PeriphClockCmd( RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB |
RCC_APB2Periph_GPIOC | RCC_APB2Periph_GPIOD | RCC_APB2Periph_GPIOE | RCC_APB2Periph_AFIO, ENABLE );
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
// Configure SPI-->NSS as output
GPIO_InitStructure.GPIO_Pin = NSS_PIN;
GPIO_Init( NSS_IOPORT, &GPIO_InitStructure );
GPIO_WriteBit( NSS_IOPORT, NSS_PIN, Bit_SET );
SpiInit();
//配置复位引脚
GPIO_InitStructure.GPIO_Pin = RESET_PIN;
GPIO_Init( RESET_IOPORT, &GPIO_InitStructure );
GPIO_WriteBit( RESET_IOPORT, RESET_PIN, Bit_SET );
// Configure radio DIO as inputs
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
// Configure DIO0
GPIO_InitStructure.GPIO_Pin = DIO0_PIN;
GPIO_Init( DIO0_IOPORT, &GPIO_InitStructure );
// Configure DIO1
GPIO_InitStructure.GPIO_Pin = DIO1_PIN;
GPIO_Init( DIO1_IOPORT, &GPIO_InitStructure );
// Configure DIO3
GPIO_InitStructure.GPIO_Pin = DIO3_PIN;
GPIO_Init( DIO3_IOPORT, &GPIO_InitStructure );
// Configure DIO4
GPIO_InitStructure.GPIO_Pin = DIO4_PIN;
GPIO_Init( DIO4_IOPORT, &GPIO_InitStructure );
}
//spi发送和接收函数
uint8_t SpiInOut( uint8_t outData )
{
/* Send SPIy data */
SPI_I2S_SendData( SPI_INTERFACE, outData );
while( SPI_I2S_GetFlagStatus( SPI_INTERFACE, SPI_I2S_FLAG_RXNE ) == RESET );
return SPI_I2S_ReceiveData( SPI_INTERFACE );
}
//spi片选，status=0使能（NSS拉低）status=1失能（NSS拉高）
void SpiNSSEnable( uint8_t status )
{
GPIO_WriteBit( NSS_IOPORT, NSS_PIN, (BitAction) status );
}
//复位引脚控制status=0拉低，其他拉高
void SX127X_ResetPinControl( uint8_t status )
{
GPIO_WriteBit( RESET_IOPORT, RESET_PIN,(BitAction) status );
}
//读取DIO0电平，返回值0低电平，1高电平
uint8_t SX1276ReadDio0(void){
return GPIO_ReadInputDataBit( DIO0_IOPORT, DIO0_PIN );
}
//读取DIO1电平，返回值0低电平，1高电平
uint8_t SX1276ReadDio1(void){
return GPIO_ReadInputDataBit( DIO1_IOPORT, DIO1_PIN );
}
/*uint8_t SX1276ReadDio2(void){
return GPIO_ReadInputDataBit( DIO2_IOPORT, DIO2_PIN );
}*/
uint8_t SX1276ReadDio3(void){
return GPIO_ReadInputDataBit( DIO3_IOPORT, DIO3_PIN );
}
uint8_t SX1276ReadDio4(void){
return GPIO_ReadInputDataBit( DIO4_IOPORT, DIO4_PIN );
}
/*uint8_t SX1276ReadDio5(void){
return GPIO_ReadInputDataBit( DIO5_IOPORT, DIO5_PIN );
}*/
SX127X/HAL/SX127x_hal.h 0 → 100644
#ifndef __SX127X_HAL_H__
#define __SX127X_HAL_H__
/*
* LoRa sx1278/76驱动
*
* \version 1.0.0
* \date Dec 17 2019
* \author Specter
*/
#include "stm32f10x.h"
#include "stm32f10x_it.h"
#include "stdio.h"
#define DEBUG( format , ... ) printf( format , ##__VA_ARGS__ ) //打印log信息的函数，可以不设置
#define GET_TICK_COUNT() GetTick() //获取systick的函数
void Soft_delay_ms(u16 time);
void SX1276HALInit( void );
uint8_t SpiInOut( uint8_t outData );
void SpiNSSEnable( uint8_t status );
void SX127X_ResetPinControl( uint8_t status );
uint8_t SX1276ReadDio0(void);
uint8_t SX1276ReadDio1(void);
uint8_t SX1276ReadDio2(void);
uint8_t SX1276ReadDio3(void);
uint8_t SX1276ReadDio4(void);
uint8_t SX1276ReadDio5(void);
#endif //end of __SX127X_HAL_H__
SX127X/example/example_CAD.c 0 → 100644
#include "example/example_CAD.h"
#include "radio/sx127x_driver.h"
#include "hal/sx127x_hal.h"
/*
* Copyright (c) 2019-2020 AIThinker.yangbin All rights reserved.
*
* 本工程只是SX127X的驱动demo，仅供参考，不保证商用稳定性。
*
* author Specter
*/
//配合main函数使用的CAD检测demo，需要轮询调用（不要同时跑多个demo，容易造成混乱）
//注意CAD监测只是检测前导码，如果当前没有前导码，但是有数据发送也是无法检测到的
void exampleCAD(void){
tRFProcessReturnCodes processRet=RF_IDLE;
processRet=g_Radio.Process();
switch(processRet){
case RF_IDLE: //空闲状态
g_Radio.StartCAD();
break;
case RF_CAD_DETECTED: //CAD检测到前导码
DEBUG("[DEBUG %s()-%d]Cad detected--------------------\r\n",__func__,__LINE__);
g_Radio.Init(NULL); //加载上次的配置
g_Radio.StartCAD();
break;
case RF_CAD_EMPTY: //CAD检测完成没有检测到前导码
DEBUG("[DEBUG %s()-%d]Cad empty\r\n",__func__,__LINE__);
g_Radio.Init(NULL); //加载上次的配置
g_Radio.StartCAD();
break;
case RF_CAD_TIMEOUT: //CAD超时
DEBUG("[ERROR %s()-%d]Cad timeout\r\n",__func__,__LINE__);
g_Radio.Init(NULL); //加载上次的配置
g_Radio.StartCAD();
break;
case RF_BUSY: //模块执行任务中
break;
case RF_UNKNOW_STATUS: //异常状态机
default:
DEBUG("[ERROR %s()-%d]unknow status:%d\r\n",__func__,__LINE__,processRet);
break;
}
}
SX127X/example/example_CAD.h 0 → 100644
#ifndef __EXAMPLE_CAD_H__
#define __EXAMPLE_CAD_H__
void exampleCAD(void);
#endif //end of __EXAMPLE_CAD_H__
SX127X/example/example_RX.c 0 → 100644
#include "example/example_CAD.h"
#include "radio/sx127x_driver.h"
#include "hal/sx127x_hal.h"
#include "string.h"
/*
* Copyright (c) 2019-2020 AIThinker.yangbin All rights reserved.
*
* 本工程只是SX127X的驱动demo，仅供参考，不保证商用稳定性。
*
* author Specter
*
* 这个函数用来进行接收测试，需要另一个模块配合发送
*/
//配合main函数使用的接收demo，需要轮询调用（不要同时跑多个demo，容易造成混乱）
void exampleRx(void){
tRFProcessReturnCodes processRet=RF_IDLE;
uint8_t rxBuf[128]={0};
uint16_t rxCount=128;
processRet=g_Radio.Process();
switch(processRet){
case RF_IDLE: //空闲状态
g_Radio.StartRx(3000);
break;
case RF_RX_DONE: //接收完成
memset(rxBuf,0,128);
g_Radio.GetRxPacket(rxBuf,&rxCount);
DEBUG("[DEBUG %s()-%d]RF_RX_DONE (%d):%s\r\n",__func__,__LINE__,rxCount,rxBuf);
g_Radio.StartRx(3000);
break;
case RF_RX_TIMEOUT: //接收超时
DEBUG("[DEBUG %s()-%d]RF_RX_TIMEOUT\r\n",__func__,__LINE__);
g_Radio.StartRx(3000);
break;
case RF_BUSY: //模块执行任务中
break;
case RF_UNKNOW_STATUS: //异常状态机
default:
DEBUG("[ERROR %s()-%d]unknow status:%d\r\n",__func__,__LINE__,processRet);
break;
}
}
SX127X/example/example_RX.h 0 → 100644
#ifndef __EXAMPLE_RX__
#define __EXAMPLE_RX__
void exampleRx(void);
#endif //end of __EXAMPLE_RX__
SX127X/example/example_TX.c 0 → 100644
#include "example/example_TX.h"
#include "radio/sx127x_driver.h"
#include "hal/sx127x_hal.h"
#include "string.h"
/*
* Copyright (c) 2019-2020 AIThinker.yangbin All rights reserved.
*
* 本工程只是SX127X的驱动demo，仅供参考，不保证商用稳定性。
*
* author Specter
*
* 这个是发送测试，配合接收模块可以测试收发程序
*/
//配合main函数使用的发送测试，需要轮询调用（不要同时跑多个demo，容易造成混乱）
void exampleTx(void){
tRFProcessReturnCodes processRet=RF_IDLE;
static uint32_t systickBak=200000;
uint8_t *txBuf=(uint8_t *)"hello world";
processRet=g_Radio.Process();
switch(processRet){
case RF_IDLE: //空闲状态
if(GET_TICK_COUNT()-systickBak >1000){
//开始一次发送
DEBUG("[DEBUG %s()-%d]start send\r\n",__func__,__LINE__);
g_Radio.SetTxPacket(txBuf,strlen((char *)txBuf),15000);
}
break;
case RF_TX_DONE: //发送完成
DEBUG("[DEBUG %s()-%d]send OK\r\n",__func__,__LINE__);
g_Radio.Reset(); //复位
g_Radio.Init(NULL); //加载上次的配置
systickBak=GET_TICK_COUNT();
break;
case RF_TX_TIMEOUT: //发送超时
DEBUG("[DEBUG %s()-%d]send Timeout\r\n",__func__,__LINE__);
g_Radio.Reset(); //复位
g_Radio.Init(NULL); //加载上次的配置
systickBak=GET_TICK_COUNT();
break;
case RF_BUSY: //模块执行任务中
break;
case RF_UNKNOW_STATUS: //异常状态机
default:
DEBUG("[ERROR %s()-%d]unknow status:%d\r\n",__func__,__LINE__,processRet);
break;
}
}
SX127X/example/example_TX.h 0 → 100644
#ifndef __EXAMPLE_TX_H__
#define __EXAMPLE_TX_H__
void exampleTx(void);
#endif //end of __EXAMPLE_TX_H__
SX127X/radio/sx127x_driver.h 0 → 100644
#ifndef __SX127X_DRIVER_H__
#define __SX127X_DRIVER_H__
#include "stdbool.h"
#include "stdint.h"
/*
* LoRa sx1278/76驱动
*
* \version 1.0.0
* \date Dec 17 2019
* \author Specter
*/
#define VERSION "2.0.0"
typedef struct _sLoRaSettings
{
uint32_t RFFrequency; //频率,单位Hz
int8_t Power; //发射功率2~20
uint8_t SignalBw; // 带宽 [0: 7.8 kHz, 1: 10.4 kHz, 2: 15.6 kHz, 3: 20.8 kHz, 4: 31.2 kHz,
// 5: 41.6 kHz, 6: 62.5 kHz, 7: 125 kHz, 8: 250 kHz, 9: 500 kHz, other: Reserved] 带宽
uint8_t SpreadingFactor;// 扩频因子 [6: 64, 7: 128, 8: 256, 9: 512, 10: 1024, 11: 2048, 12: 4096 chips] 扩频因子
uint8_t ErrorCoding; // 误码编码率 [1: 4/5, 2: 4/6, 3: 4/7, 4: 4/8] 编码率
uint16_t PreambleLength; //前导码长度
}tLoRaSettings;
//定义模块状态机(这个是返回给用户看的，实际模块执行的状态机比这个多)
typedef enum
{
RF_IDLE, //空闲状态
RF_BUSY, //模块执行任务中
RF_RX_DONE, //接收完成
RF_RX_TIMEOUT, //接收超时
RF_TX_DONE, //发送完成
RF_TX_TIMEOUT, //发送超时
RF_CAD_DETECTED, //CAD检测到前导码
RF_CAD_EMPTY, //CAD检测完成，没有检测到前导码
RF_CAD_TIMEOUT, //CAD超时
RF_UNKNOW_STATUS //异常状态机
}tRFProcessReturnCodes;
//硬件工作模式
typedef enum{
LORA_OPMODE_SLEEP=0,
LORA_OPMODE_STANDBY,
LORA_OPMODE_SYNTHESIZER_TX,
LORA_OPMODE_TRANSMITTER,
LORA_OPMODE_SYNTHESIZER_RX,
LORA_OPMODE_RECEIVER,
LORA_OPMODE_RECIVER_SINGLE,
LORA_OPMODE_CAD,
}LoRaOpModeType;
//驱动结构体，用来保存相关操作的函数
typedef struct sRadioDriver
{
void ( *Init )( tLoRaSettings *stting );
void ( *Reset )( void );
void ( *StartRx )( uint32_t timeoutSystick );
void ( *GetRxPacket )( void *buffer, uint16_t *size );
void ( *SetTxPacket )( const void *buffer, uint16_t size,uint32_t timeoutSystick);
void ( *StartCAD )( void );
tRFProcessReturnCodes ( *Process )( void );
}tRadioDriver;
extern tRadioDriver g_Radio;
void sx127xInit(tLoRaSettings *stting);
void Sx127xRestart(void);
void SX127xSetLoRaMode(void);
void Write127xReg(uint8_t addr,uint8_t data);
uint8_t Read127xReg(uint8_t addr);
void SX127xWriteFifo( uint8_t *buffer, uint8_t size );
void SX127xReadFifo( uint8_t *buffer, uint8_t size );
void SX127xSetOpMode(LoRaOpModeType opMode);
LoRaOpModeType SX127xGetOpMode(void);
void SX127xSetFrf(uint32_t fr);
uint8_t sx127xSend(uint8_t *data,uint8_t len,uint32_t timeoutMs);
uint8_t sx127xRx(uint8_t *buf,uint8_t *len,uint32_t timeoutMs);
tRFProcessReturnCodes SX127xProcess( void );
#endif //end of __SX127X_DRIVER_H__
main/main.c 0 → 100644
#include "stm32f10x.h"
#include "stdio.h"
#include "string.h"
#include "stm32f10x_it.h"
#include "radio/sx127x_driver.h"
#include "example/example_TX.h"
#include "example/example_RX.h"
#include "example/example_CAD.h"
/*
* Copyright (c) 2019-2020 AIThinker.yangbin All rights reserved.
*
* 本工程只是SX127X的驱动demo，仅供参考，不保证商用稳定性。
*
* author Specter
*/
#define TEST_MOD 1 //测试模式 1表示非阻塞式模式，0表示阻塞式模式(默认为非阻塞发送模式)
#if !TEST_MOD
#define IS_TX_MOD 0 //1表示发送模式，0表示接收模式(仅阻塞模式生效)
#endif
#pragma import(__use_no_semihosting)
//标准库需要支持的函数
struct __FILE
{
int handle;
};
FILE __stdout;
//定义_sys_exit()以避免工作在半主机状态
void _sys_exit(int x)
{
x = x;
}
//重定义fputc函数
//这个需要根据MCU和我们希望printf从哪个串口输出来确认 __WAIT_TODO__
int fputc(int ch, FILE *f)
{
//注意：USART_FLAG_TXE是检查发送缓冲区是否为空，这个要在发送前检查，检查这个提议提高发送效率，但是在休眠的时候可能导致最后一个字符丢失
//USART_FLAG_TC是检查发送完成标志，这个在发送后检查，这个不会出现睡眠丢失字符问题，但是效率低（发送过程中发送缓冲区已经为空了，可以接收下一个数据了，但是因为要等待发送完成，所以效率低）
//不要两个一起用，一起用效率最低
//循环等待直到发送缓冲区为空(TX Empty)此时可以发送数据到缓冲区
while (USART_GetFlagStatus(USART2, USART_FLAG_TXE) == RESET)
{}
USART_SendData(USART2, (uint8_t) ch);
/* 循环等待直到发送结束*/
//while (USART_GetFlagStatus(USART2, USART_FLAG_TC) == RESET)
//{}
return ch;
}
void uartInit(){
USART_InitTypeDef USART_InitStructure;
GPIO_InitTypeDef GPIO_InitStructure;
USART_DeInit(USART2); //复位串口
RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2, ENABLE);//注意APB1和APB2时钟使能函数不一样
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE); //使能指定端口时钟
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; //IO口速度为50MHz，这里不用传参，直接写死用最大速度50MHZ
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2;
GPIO_InitStructure.GPIO_Mode=GPIO_Mode_AF_PP;
GPIO_Init(GPIOA, &GPIO_InitStructure); //初始化GPIO
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3;
GPIO_InitStructure.GPIO_Mode=GPIO_Mode_IN_FLOATING;
GPIO_Init(GPIOA, &GPIO_InitStructure); //初始化GPIO
//USART配置
USART_InitStructure.USART_BaudRate = 115200; //设置串口波特率
USART_InitStructure.USART_WordLength = USART_WordLength_8b; //字长为8
USART_InitStructure.USART_StopBits = USART_StopBits_1; //1个停止位
USART_InitStructure.USART_Parity = USART_Parity_No; //无奇偶校验
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; //无流控
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; //收发模式
USART_Init(USART2, &USART_InitStructure); //配置USART参数
USART_Cmd(USART2, ENABLE); //使能USART
}
void delayMsBySystick(uint32_t timeoutMs){
uint32_t systickBak,currTick;
systickBak=GetTick();
while(1){
currTick=GetTick();
if(currTick>=systickBak){
if(currTick-systickBak>timeoutMs){
return;
}
}else{
//currTick溢出了
if(currTick+(~systickBak)>timeoutMs){
return;
}
}
}
}
int main(void){
tLoRaSettings stting={435000000,20,7,12,1,0x0005}; //频率435M，功率20dbm，带宽125kHz，SF=12，误码编码率4/5,前导码长度0x0005
SysTick_Config(SystemCoreClock/1000);
uartInit();
printf("version:%s\r\n",VERSION);
g_Radio.Init(&stting); //初始化配置
printf("init OK\r\n");
while(1){
#if TEST_MOD
//非阻塞测试
exampleTx(); //发送测试，发送完成等待1s后再次发送
//exampleRx(); //循环接收
//exampleCAD(); //CAD循环检测测试
#else //else of #if IS_TX_MOD
//阻塞收发测试
#if IS_TX_MOD
if(0==sx127xSend((uint8_t *)"aithinker",strlen("aithinker"),1000)){ //发送数据，软件超时时间1000Ms
printf("send ok\r\n");
}else{
printf("send timeout\r\n");
}
delayMsBySystick(1000);
#else
uint8_t u8_ret,rxBuf[128]={0},rxCount=128;
rxCount=255;
memset(rxBuf,0,255);
printf("start rx\r\n");
u8_ret=sx127xRx(rxBuf,&rxCount,2000); //接收数据，rxBuf存储数据内容，rxCount存储接收到的数据长度，软件超时1000Ms
switch(u8_ret){
case 0:
printf("rx done\r\n len:%d\r\n playload:%s\r\n",rxCount,rxBuf);
break;
case 1:
case 2:
printf("rx timeout ret:%d\r\n",u8_ret);
break;
default:
printf("unknow ret:%d\r\n",u8_ret);
break;
}
#endif //end of #if IS_TX_MOD
#endif //end of #if IS_TX_MOD
}
}
main/stm32f10x.h 0 → 100644
This source diff could not be displayed because it is too large. You can view the blob instead.
main/stm32f10x_conf.h 0 → 100644
/**
******************************************************************************
* @file GPIO/IOToggle/stm32f10x_conf.h
* @author MCD Application Team
* @version V3.5.0
* @date 08-April-2011
* @brief Library configuration file.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_CONF_H
#define __STM32F10x_CONF_H
/* Includes ------------------------------------------------------------------*/
/* Uncomment/Comment the line below to enable/disable peripheral header file inclusion */
#include "stm32f10x_adc.h"
#include "stm32f10x_bkp.h"
#include "stm32f10x_can.h"
#include "stm32f10x_cec.h"
#include "stm32f10x_crc.h"
#include "stm32f10x_dac.h"
#include "stm32f10x_dbgmcu.h"
#include "stm32f10x_dma.h"
#include "stm32f10x_exti.h"
#include "stm32f10x_flash.h"
#include "stm32f10x_fsmc.h"
#include "stm32f10x_gpio.h"
#include "stm32f10x_i2c.h"
#include "stm32f10x_iwdg.h"
#include "stm32f10x_pwr.h"
#include "stm32f10x_rcc.h"
#include "stm32f10x_rtc.h"
#include "stm32f10x_sdio.h"
#include "stm32f10x_spi.h"
#include "stm32f10x_tim.h"
#include "stm32f10x_usart.h"
#include "stm32f10x_wwdg.h"
#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Uncomment the line below to expanse the "assert_param" macro in the
Standard Peripheral Library drivers code */
/* #define USE_FULL_ASSERT 1 */
/* Exported macro ------------------------------------------------------------*/
#ifdef USE_FULL_ASSERT
/**
* @brief The assert_param macro is used for function's parameters check.
* @param expr: If expr is false, it calls assert_failed function which reports
* the name of the source file and the source line number of the call
* that failed. If expr is true, it returns no value.
* @retval None
*/
#define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
/* Exported functions ------------------------------------------------------- */
void assert_failed(uint8_t* file, uint32_t line);
#else
#define assert_param(expr) ((void)0)
#endif /* USE_FULL_ASSERT */
#endif /* __STM32F10x_CONF_H */
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
main/stm32f10x_it.c 0 → 100644
/**
******************************************************************************
* @file GPIO/IOToggle/stm32f10x_it.c
* @author MCD Application Team
* @version V3.5.0
* @date 08-April-2011
* @brief Main Interrupt Service Routines.
* This file provides template for all exceptions handler and peripherals
* interrupt service routine.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_it.h"
__IO uint32_t g_u32SystickCount=0;
void NMI_Handler(void)
{
}
void HardFault_Handler(void)
{
/* Go to infinite loop when Hard Fault exception occurs */
while (1)
{
}
}
void MemManage_Handler(void)
{
/* Go to infinite loop when Memory Manage exception occurs */
while (1)
{
}
}
void BusFault_Handler(void)
{
/* Go to infinite loop when Bus Fault exception occurs */
while (1)
{
}
}
void UsageFault_Handler(void)
{
/* Go to infinite loop when Usage Fault exception occurs */
while (1)
{
}
}
void SVC_Handler(void)
{
}
void DebugMon_Handler(void)
{
}
void PendSV_Handler(void)
{
}
void SysTick_Handler(void)
{
g_u32SystickCount++;
}
/*获取当前滴答计时器数值*/
uint32_t GetTick(void){
return g_u32SystickCount;
}
/******************************************************************************/
/* STM32F10x Peripherals Interrupt Handlers */
/* Add here the Interrupt Handler for the used peripheral(s) (PPP), for the */
/* available peripheral interrupt handler's name please refer to the startup */
/* file (startup_stm32f10x_xx.s). */
/******************************************************************************/
main/stm32f10x_it.h 0 → 100644
/**
******************************************************************************
* @file GPIO/IOToggle/stm32f10x_it.h
* @author MCD Application Team
* @version V3.5.0
* @date 08-April-2011
* @brief This file contains the headers of the interrupt handlers.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_IT_H
#define __STM32F10x_IT_H
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
void NMI_Handler(void);
void HardFault_Handler(void);
void MemManage_Handler(void);
void BusFault_Handler(void);
void UsageFault_Handler(void);
void SVC_Handler(void);
void DebugMon_Handler(void);
void PendSV_Handler(void);
void SysTick_Handler(void);
uint32_t GetTick(void);
#endif /* __STM32F10x_IT_H */
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
main/system_stm32f10x.h 0 → 100644
/**
******************************************************************************
* @file system_stm32f10x.h
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Header File.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup stm32f10x_system
* @{
*/
/**
* @brief Define to prevent recursive inclusion
*/
#ifndef __SYSTEM_STM32F10X_H
#define __SYSTEM_STM32F10X_H
#ifdef __cplusplus
extern "C" {
#endif
/** @addtogroup STM32F10x_System_Includes
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F10x_System_Exported_types
* @{
*/
extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
/**
* @}
*/
/** @addtogroup STM32F10x_System_Exported_Constants
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F10x_System_Exported_Macros
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F10x_System_Exported_Functions
* @{
*/
extern void SystemInit(void);
extern void SystemCoreClockUpdate(void);
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /*__SYSTEM_STM32F10X_H */
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
project/DebugConfig/SX127xDriver_STM32F103C8.dbgconf 0 → 100644
// <<< Use Configuration Wizard in Context Menu >>>
// <h> Debug MCU Configuration
// <o0.0> DBG_SLEEP
// <i> Debug Sleep Mode
// <i> 0: (FCLK=On, HCLK=Off) FCLK is clocked by the system clock as previously configured by the software while HCLK is disabled
// <i> 1: (FCLK=On, HCLK=On) HCLK is fed by the same clock that is provided to FCLK
// <o0.1> DBG_STOP
// <i> Debug Stop Mode
// <i> 0: (FCLK=Off, HCLK=Off) Clock controller disables all clocks
// <i> 1: (FCLK=On, HCLK=On) FCLK and HCLK are provided by the internal RC oscillator which remains active
// <o0.2> DBG_STANDBY
// <i> Debug Standby Mode
// <i> 0: (FCLK=Off, HCLK=Off) The whole digital part is unpowered.
// <i> 1: (FCLK=On, HCLK=On) Digital part is powered and FCLK and HCLK are provided by the internal RC oscillator which remains active
// <o0.8> DBG_IWDG_STOP
// <i> Debug independent watchdog stopped when core is halted
// <i> 0: The watchdog counter clock continues even if the core is halted
// <i> 1: The watchdog counter clock is stopped when the core is halted
// <o0.9> DBG_WWDG_STOP
// <i> Debug window watchdog stopped when core is halted
// <i> 0: The window watchdog counter clock continues even if the core is halted
// <i> 1: The window watchdog counter clock is stopped when the core is halted
// <o0.10> DBG_TIM1_STOP
// <i> Timer 1 counter stopped when core is halted
// <i> 0: The clock of the involved Timer Counter is fed even if the core is halted
// <i> 1: The clock of the involved Timer counter is stopped when the core is halted
// <o0.11> DBG_TIM2_STOP
// <i> Timer 2 counter stopped when core is halted
// <i> 0: The clock of the involved Timer Counter is fed even if the core is halted
// <i> 1: The clock of the involved Timer counter is stopped when the core is halted
// <o0.12> DBG_TIM3_STOP
// <i> Timer 3 counter stopped when core is halted
// <i> 0: The clock of the involved Timer Counter is fed even if the core is halted
// <i> 1: The clock of the involved Timer counter is stopped when the core is halted
// <o0.13> DBG_TIM4_STOP
// <i> Timer 4 counter stopped when core is halted
// <i> 0: The clock of the involved Timer Counter is fed even if the core is halted
// <i> 1: The clock of the involved Timer counter is stopped when the core is halted
// <o0.14> DBG_CAN1_STOP
// <i> Debug CAN1 stopped when Core is halted
// <i> 0: Same behavior as in normal mode
// <i> 1: CAN1 receive registers are frozen
// <o0.15> DBG_I2C1_SMBUS_TIMEOUT
// <i> I2C1 SMBUS timeout mode stopped when Core is halted
// <i> 0: Same behavior as in normal mode
// <i> 1: The SMBUS timeout is frozen
// <o0.16> DBG_I2C2_SMBUS_TIMEOUT
// <i> I2C2 SMBUS timeout mode stopped when Core is halted
// <i> 0: Same behavior as in normal mode
// <i> 1: The SMBUS timeout is frozen
// <o0.17> DBG_TIM8_STOP
// <i> Timer 8 counter stopped when core is halted
// <i> 0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
// <i> 1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
// <o0.18> DBG_TIM5_STOP
// <i> Timer 5 counter stopped when core is halted
// <i> 0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
// <i> 1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
// <o0.19> DBG_TIM6_STOP
// <i> Timer 6 counter stopped when core is halted
// <i> 0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
// <i> 1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
// <o0.20> DBG_TIM7_STOP
// <i> Timer 7 counter stopped when core is halted
// <i> 0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
// <i> 1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
// <o0.21> DBG_CAN2_STOP
// <i> Debug CAN2 stopped when Core is halted
// <i> 0: Same behavior as in normal mode
// <i> 1: CAN2 receive registers are frozen
// <o0.25> DBG_TIM12_STOP
// <i> Timer 12 counter stopped when core is halted
// <i> 0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
// <i> 1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
// <o0.26> DBG_TIM13_STOP
// <i> Timer 13 counter stopped when core is halted
// <i> 0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
// <i> 1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
// <o0.27> DBG_TIM14_STOP
// <i> Timer 14 counter stopped when core is halted
// <i> 0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
// <i> 1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
// <o0.28> DBG_TIM9_STOP
// <i> Timer 9 counter stopped when core is halted
// <i> 0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
// <i> 1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
// <o0.29> DBG_TIM10_STOP
// <i> Timer 10 counter stopped when core is halted
// <i> 0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
// <i> 1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
// <o0.30> DBG_TIM11_STOP
// <i> Timer 11 counter stopped when core is halted
// <i> 0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
// <i> 1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
// </h>
DbgMCU_CR = 0x00000007;
// <<< end of configuration section >>>
\ No newline at end of file
project/EventRecorderStub.scvd 0 → 100644
<?xml version="1.0" encoding="utf-8"?>
<component_viewer schemaVersion="0.1" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xs:noNamespaceSchemaLocation="Component_Viewer.xsd">
<component name="EventRecorderStub" version="1.0.0"/> <!--name and version of the component-->
<events>
</events>
</component_viewer>
project/JLinkSettings.ini 0 → 100644
[BREAKPOINTS]
ForceImpTypeAny = 0
ShowInfoWin = 1
EnableFlashBP = 2
BPDuringExecution = 0
[CFI]
CFISize = 0x00
CFIAddr = 0x00
[CPU]
MonModeVTableAddr = 0xFFFFFFFF
MonModeDebug = 0
MaxNumAPs = 0
LowPowerHandlingMode = 0
OverrideMemMap = 0
AllowSimulation = 1
ScriptFile=""
[FLASH]
CacheExcludeSize = 0x00
CacheExcludeAddr = 0x00
MinNumBytesFlashDL = 0
SkipProgOnCRCMatch = 1
VerifyDownload = 1
AllowCaching = 1
EnableFlashDL = 2
Override = 0
Device="ARM7"
[GENERAL]
WorkRAMSize = 0x00
WorkRAMAddr = 0x00
RAMUsageLimit = 0x00
[SWO]
SWOLogFile=""
[MEM]
RdOverrideOrMask = 0x00
RdOverrideAndMask = 0xFFFFFFFF
RdOverrideAddr = 0xFFFFFFFF
WrOverrideOrMask = 0x00
WrOverrideAndMask = 0xFFFFFFFF
WrOverrideAddr = 0xFFFFFFFF
project/Listings/sx127xDriverSDK.map 0 → 100644
This source diff could not be displayed because it is too large. You can view the blob instead.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment