[Debug] SD card and openbciGUI OK.

Signed-off-by: zhanggf <zhanggf@example.com>

Cyton/Cyton_Esp12Data.c

@@ -10,10 +10,13 @@
 #include "cJSON.h"
 
 #include "myQueue.h"
+#include "cyton_cmd_pub.h"
 
 
 typedef struct stCytron_DevSeting {
-    uint8_t aucRate;
+    int iRate;
+    uint32_t uiSaveSdCardMs;
+    uint8_t aucDeviceNum;
     uint8_t aucStreamStat;
 } CYTON_DEVSETING_T;
 
@@ -23,6 +26,7 @@ static int g_iOpenguiFd = 4;
 static uint8_t g_iOepnguiConnnectStat = 0;
 static CYTON_DEVSETING_T g_stCytron_DevSeting;
 
+#if 0
 static int Ctron_atoi(uint8_t *szData, int iLen)
 {
     //0,11:123456711
@@ -214,21 +218,6 @@ void Ctron_Esp12Data_Recv(int iFD, uint8_t *szData, int iLen)
 
 void Ctron_Esp12Data_Send(int iFD, uint8_t *szData, int iLen, int iClose)
 {
-    uint8_t szCmd[64] = 0;
-
-    sprintf(szCmd, "AT+CIPSEND=%d,%d\r\n", iFD, iLen);
-    /* AT+CIPSEND=<link ID>,<length> */
-    ESP8266_SendCmd(szCmd, ">", 100);
-    ESP8266_SendData(szData, iLen);
-
-    //delay_ms(20);
-
-    if (iClose) {
-        delay_ms(200);
-        memset(szCmd, 0, sizeof(szCmd));
-        sprintf(szCmd, "AT+CIPCLOSE=%d\r\n", iFD);
-        ESP8266_SendCmd(szCmd, "OK", 50);
-    }
 }
 
 
@@ -259,6 +248,8 @@ int CytonEsp12_DataGetReportFd()
     return g_iOpenguiFd;
 }
 
+#endif 
+
 int CytonEsp12_StreamStat()
 {
     return g_stCytron_DevSeting.aucStreamStat;
@@ -269,37 +260,122 @@ void CytonEsp12_SetStreamStat(int iStat)
     g_stCytron_DevSeting.aucStreamStat = iStat;
 }
 
-int CytonEsp12_GetCurrentRate()
+uint8_t CytonEsp12_GetCurrentRateCmd()
 {
-    int iRate = g_stCytron_DevSeting.aucRate;
-    int iRet = 1000;
+    int iRate = g_stCytron_DevSeting.iRate;
+    uint8_t aucRet = 0;
+    /*
+        ADS129X_CMD_250HZ = 0,
+	ADS129X_CMD_500HZ,
+	ADS129X_CMD_1000HZ,
+	ADS129X_CMD_2000HZ,
+	ADS129X_CMD_4000HZ,
+	ADS129X_CMD_8000HZ,
+    */
 
-    switch(iRate) {
-        case 0:
-            iRet = 16000;
-            break;
-        case 1:
-            iRet = 8000;
-            break;
-        case 2:
-            iRet = 4000;
-            break;
-        case 3:
-            iRet = 2000;
-            break;
-        case 4:
-            iRet = 1000;
-            break;
-        case 5:
-            iRet = 500;
-        case 6:
-            iRet = 250;
+    if (250 == iRate) {
+        aucRet = ADS129X_CMD_250HZ;
+    } else if (500 == iRate) {
+        aucRet = ADS129X_CMD_500HZ;
+    } else if (1000 == iRate) {
+        aucRet = ADS129X_CMD_1000HZ;
+    } else if (2000 == iRate) {
+        aucRet = ADS129X_CMD_2000HZ;
+    } else if (4000 == iRate) {
+        aucRet = ADS129X_CMD_4000HZ;
+    } else if (8000 == iRate) {
+        aucRet = ADS129X_CMD_8000HZ;
+    }
+
+    return aucRet;
+}
+
+
+#define toNet32(A)   ((( (unsigned int)(A) & 0xff000000) >> 24)|(( (unsigned int)(A) & 0x00ff0000) >> 8)|(( (unsigned int)(A) & 0x0000ff00) << 8)|(( (unsigned int)(A) & 0x000000ff) << 24)) 
+
+int g_iHz = 0;
+
+void CytonEsp12_PraseLoop()
+{
+	//ESP8266_RX_BUF, ESP8266_RX_LEN,//
+	CYTON_CMD_INFO_T *pstCmdInfo = NULL;
+	char *pszIndex = ESP8266_RX_BUF;
+	int iLen = ESP8266_RX_LEN;
+
+	while (iLen > 0) {
+		if (iLen >= sizeof(CYTON_CMD_INFO_T)) {
+			pstCmdInfo = (CYTON_CMD_INFO_T *) pszIndex;
+			if (CYTON_CMD_HEAD == toNet32(pstCmdInfo->uiHead)) {
+				ESP8266_DEBUG("Find cmd %08x\r\n", toNet32(pstCmdInfo->iType));
+				ESP8266_DEBUG("Find p1 %08x\r\n", toNet32(pstCmdInfo->uiParam1));
+				if (toNet32(pstCmdInfo->iType) == CYTON_CMD_HZ) {
+					g_stCytron_DevSeting.iRate = toNet32(pstCmdInfo->uiParam1);
+					ESP8266_DEBUG("g_iHz %d\r\n", g_stCytron_DevSeting.iRate);
+                } else if (toNet32(pstCmdInfo->iType) == CYTON_CMD_SD) {
+                    g_stCytron_DevSeting.uiSaveSdCardMs = toNet32(pstCmdInfo->uiParam1) * 1000;
+                    ESP8266_DEBUG("Save SD command %d \r\n", g_stCytron_DevSeting.uiSaveSdCardMs);
+                    g_stCytron_DevSeting.iRate = 250;
+                } else if (toNet32(pstCmdInfo->iType) == CYTON_CMD_DEVICE_CONN) {
+                    g_stCytron_DevSeting.aucDeviceNum = toNet32(pstCmdInfo->uiParam1);
+                    ESP8266_DEBUG("Current Device connect number %d S\r\n", g_stCytron_DevSeting.aucDeviceNum);
+				} else if (toNet32(pstCmdInfo->iType) == CYTON_CMD_START) {
+					ESP8266_DEBUG("Start collector %d Hz\r\n", g_stCytron_DevSeting.iRate);
+                    if (0 == CytonEsp12_StreamStat()) {
+                        if (g_stCytron_DevSeting.uiSaveSdCardMs > 0) {
+                            CytonSD_Start();
+                        }
+					    
+					    ADS129x_ReInit(1, CytonEsp12_GetCurrentRateCmd());	
+					    CytonEsp12_SetStreamStat(1);
+                    } else {
+                        ESP8266_DEBUG("Already start collector %d Hz, ignore\r\n", g_stCytron_DevSeting.iRate);
+                    }
+				} else if (toNet32(pstCmdInfo->iType) == CYTON_CMD_STOP) {
+					ESP8266_DEBUG("Stop collector\r\n");
+					CytonEsp12_SetStreamStat(0);
+					ADS129x_Stop();
+                    if (g_stCytron_DevSeting.uiSaveSdCardMs > 0) {
+                        CytonSD_Stop();
+                    }
+				}
+
+				ESP8266_CLEAR();
 				break;
-        default:
+			} 
+		} else {
 			break;
 		}
 
-    return iRet;
+		pszIndex ++;
+		iLen --;
+	}
+
+	//ESP8266_CLEAR();
+}
+
+
+uint32_t CytonEsp12_GetSDSaveMs()
+{
+    return g_stCytron_DevSeting.uiSaveSdCardMs;
+}
+
+uint32_t CytonEsp12_KeySaveSD()
+{
+    if (0 == CytonEsp12_StreamStat()) {
+        g_stCytron_DevSeting.uiSaveSdCardMs = 300000;
+        g_stCytron_DevSeting.iRate = 250;
+        CytonSD_Start();
+        ADS129x_ReInit(1, CytonEsp12_GetCurrentRateCmd());	
+        CytonEsp12_SetStreamStat(1);
+        ESP8266_DEBUG("Button start collector %d Hz, ignore\r\n", g_stCytron_DevSeting.iRate);
+    } else {
+        ESP8266_DEBUG("Button Stop collector\r\n");
+		CytonEsp12_SetStreamStat(0);
+		ADS129x_Stop();
+        if (g_stCytron_DevSeting.uiSaveSdCardMs > 0) {
+            CytonSD_Stop();
+        }
+    }
 }
 
 

Cyton/Cyton_Esp12Data.h

@@ -29,7 +29,11 @@ void Ctron_Esp12Data_Recv(int iFd, uint8_t *szData, int iLen);
 void Ctron_Esp12Data_Send(int iFd, uint8_t *szData, int iLen, int iClose);
 int CytonEsp12_DataGetReportFd();
 int CytonEsp12_StreamStat();
-int CytonEsp12_GetCurrentRate();
+uint8_t CytonEsp12_GetCurrentRateCmd();
 void CytonEsp12_SetStreamStat(int iStat);
+void CytonEsp12_PraseLoop();
+
+uint32_t CytonEsp12_GetSDSaveMs();
+uint32_t CytonEsp12_KeySaveSD();
 				    
 #endif

Cyton/Cyton_Process.c

@@ -14,6 +14,7 @@
 
 #define CYTON_COLLECTOR_DATA_CACHE_LEN      (123)
 
+#if 0
 static int g_iTimerindex = 0;
 static int g_iTotalLen = 0;
 
@@ -126,3 +127,4 @@ void CytonProcess_Loop()
         }
     }
 }
+#endif 
\ No newline at end of file

Cyton/Cyton_SD.c

+#include "Cyton_SD.h"
+#include "usart.h"	
+#include <string.h>
+#include "delay.h"       
+#include "led.h"       
+#include "key.h"
+#include "Timer.h"
+#include "ADS129x.h"
+#include "adc.h"
+#include "fattester.h"
+
+
+#include "myQueue.h"
+
+
+static int g_SdInitResult = 0;
+static int g_SdIsBusy = 0;
+static FIL g_stfile;
+static u8 sd_path[] = "0:";
+static uint8_t g_aucWriteHeadIndex = 0;
+
+int CytonSD_Init()
+{
+	int iRet = -1;
+    exfuns_init();
+	iRet = mf_mount(sd_path, 1);
+    if (iRet == 0) {
+	    Main_printf("mount end %d Success\r\n", iRet);
+	    mf_showfree("0:");
+        g_SdInitResult = 1;
+    } else {
+        Main_printf("mount end %d failed\r\n", iRet);
+    }
+
+    mf_scan_files("0:");
+	mf_showfree("0:");
+
+    return iRet;
+}
+
+int CytonSD_Start()
+{
+    int iLoop = 0;
+    char szFileName[64] = {0};
+    char szAbFileName[64] = {0};
+    int iRet = 0;
+    char szTmp[16] = {0};
+
+    g_aucWriteHeadIndex = 0;
+    if (1 != g_SdInitResult) {
+        Main_printf("SD not mount\r\n");
+        return -1;
+    }
+
+    for (iLoop = 0; iLoop < 256; iLoop ++) {
+		memset(szFileName, 0, sizeof(szFileName));
+		sprintf(szFileName, "OPBI_%d.txt", iLoop);
+		if (0 == mf_scan_fileExist("0:", szFileName)) {
+			Main_printf("file is not exist, start creat %s\r\n", szFileName);
+			sprintf(szAbFileName, "0:%s", szFileName);
+			break;
+		}
+	}
+
+    iRet = f_open(&g_stfile, szAbFileName, FA_CREATE_NEW | FA_WRITE);
+	Main_printf("f_open %d\r\n", iRet);
+    if (0 == iRet) {
+        sprintf(szTmp, "%08X\n", CytonSys_GetCurrentms());
+        CytonSD_Write("%STOP AT\n", strlen("%STOP AT\n"));
+        CytonSD_Write(szTmp, strlen(szTmp));
+    }
+    
+    g_SdIsBusy = 1;
+	
+	f_sync(&g_stfile);
+
+    return iRet;
+}
+
+int CytonSD_Write(char *szBuf, int iLen)
+{
+    int iRet = -1;
+    int iWriten = 0;
+
+    if (1 != g_SdInitResult) {
+        return 0;
+    }
+
+    //f_lseek(&file, 1024*1024);
+    iRet = f_write(&g_stfile, szBuf, iLen, &iWriten);
+	if (iRet != 0) {
+		Main_printf("[%d] %d iWriten %d failed\r\n", iRet);
+	}
+    //f_sync(&g_stfile);
+
+    return iWriten;
+}
+
+int CytonSD_WriteChannelData(char *szBuf, int iChannel, int iNum)
+{
+    char szTmp[512] = {0};
+    int iLoop = 0;
+    int iOneBufLen = 0;
+    int iLoopJ = 0;
+
+    if (1 != g_SdInitResult) {
+        return 0;
+    }
+
+    iOneBufLen = iChannel * 7 + 3;
+    for (;iLoop < iNum; iLoop++) {
+        g_aucWriteHeadIndex ++;
+        sprintf((szTmp + iOneBufLen * iLoop), "%02X,", g_aucWriteHeadIndex);
+        for (iLoopJ = 0; iLoopJ < iChannel; iLoopJ ++) {
+            sprintf((szTmp + iOneBufLen * iLoop + 3 + iLoopJ * 7), "%02X", *(szBuf + iLoop * iChannel * 3 + iLoopJ * 3));
+            sprintf((szTmp + iOneBufLen * iLoop + 3 + iLoopJ * 7 + 2), "%02X", *(szBuf + iLoop * iChannel * 3 + iLoopJ * 3 +1));
+            if (iLoopJ == (iChannel - 1)) {
+                sprintf((szTmp + iOneBufLen * iLoop + 3 + iLoopJ * 7 + 4), "%02X\n", *(szBuf + iLoop * iChannel * 3 + iLoopJ * 3 + 2));
+            } else {
+                sprintf((szTmp + iOneBufLen * iLoop + 3 + iLoopJ * 7 + 4), "%02X,", *(szBuf + iLoop * iChannel * 3 + iLoopJ * 3 + 2));
+            }
+        }
+    }
+
+    //printf("szTmp %s ****\n",szTmp);
+    CytonSD_Write(szTmp, strlen(szTmp));
+    return 0;
+}
+
+int CytonSD_Stop()
+{
+    char szTmp[16] = {0};
+
+
+    if (1 != g_SdInitResult) {
+        return 0;
+    }
+
+    //sprintf(szTmp, "%08X\n", CytonSys_GetCurrentms());
+    //CytonSD_Write("%STOP AT\n", strlen("%STOP AT\n"));
+    //CytonSD_Write(szTmp, strlen(szTmp));
+
+    CytonSD_Write("%Total time mS:\n", strlen("%Total time mS:\n"));
+    CytonSD_Write(szTmp, strlen(szTmp));
+
+    CytonSD_Write("%min Write time uS:\n", strlen("%min Write time uS:\n"));
+    CytonSD_Write(szTmp, strlen(szTmp));
+
+    CytonSD_Write("%max Write time uS:\n", strlen("%max Write time uS:\n"));
+    CytonSD_Write(szTmp, strlen(szTmp));
+
+    CytonSD_Write("%Over:\n", strlen("%Over:\n"));
+    CytonSD_Write(szTmp, strlen(szTmp));
+
+    CytonSD_Write("%block, uS\n", strlen("%block, uS\n"));
+    CytonSD_Write(szTmp, strlen(szTmp));
+
+    g_SdIsBusy = 0;
+    g_aucWriteHeadIndex = 0;
+    f_close(&g_stfile);
+    return 0;
+}
+
+int CytonSD_GetStatus()
+{
+    return (g_SdInitResult + g_SdIsBusy);
+}
\ No newline at end of file

Cyton/Cyton_SD.h

+#ifndef __CYTON_SD_H
+#define __CYTON_SD_H	 
+
+#include "sys.h"
+#include "myQueue.h"
+
+int CytonSD_Init();
+int CytonSD_Start();
+int CytonSD_Write(char *szBuf, int iLen);
+int CytonSD_WriteChannelData(char *szBuf, int iChannel, int iNum);
+int CytonSD_Stop();
+ 				    
+#endif

Cyton/cyton_cmd_pub.h

@@ -8,6 +8,7 @@ typedef enum tagCytonCmd_Type {
     CYTON_CMD_STOP,
     CYTON_CMD_HZ,
     CYTON_CMD_SD,
+    CYTON_CMD_DEVICE_CONN,
 	CYTON_CMD_UNKNOW,     /* -5 Read data error */
 } CYTON_CMD_TYPE_E;
 

CytonHal/Cyton_SysApi.c

@@ -12,6 +12,7 @@
 
 static CYTON_SYS_API_TIMER_CB g_pfCollectorTimerCB = NULL;
 static int g_iSysApi_collectorTIndex = 0;
+static uint32_t g_uiSysMs = 0;
 
 
 void CytonSys_CollectorTimerStart(int iHz, CYTON_SYS_API_TIMER_CB pfCB)
@@ -39,3 +40,27 @@ void CytonSys_CollectorCB()
         (*g_pfCollectorTimerCB)(g_iSysApi_collectorTIndex);
     }
 }
+
+void cytonSys_msCB(uint32_t iTimeIndex)
+{
+    g_uiSysMs ++;
+}
+
+void CytonSys_StartupTimerInit()
+{
+    int iArr = 0;
+    g_pfCollectorTimerCB = cytonSys_msCB;
+
+    /* 10000 1s CB.*/
+    iArr = 10;
+
+    /* 7200 0000 */
+    TIM1_Init(iArr, 7200);
+    TIM1_Start();
+
+}
+
+uint32_t CytonSys_GetCurrentms()
+{
+    return g_uiSysMs;
+}
\ No newline at end of file

CytonHal/Cyton_SysApi.h

@@ -4,12 +4,15 @@
 #include "sys.h"
 #include "myQueue.h"
 
-typedef void (*CYTON_SYS_API_TIMER_CB)(int iTimeIndex);
+typedef void (*CYTON_SYS_API_TIMER_CB)(uint32_t iTimeIndex);
 
 void CytonSys_CollectorTimerStart(int iHz, CYTON_SYS_API_TIMER_CB pfCB);
 void CytonSys_Stop();
 void CytonSys_CollectorCB();
 
+void CytonSys_StartupTimerInit();
+uint32_t CytonSys_GetCurrentms();
+ 				    
 #endif
 
 

FATFS/exfuns/fattester.c

@@ -263,6 +263,31 @@ u32 mf_showfree(u8 *drv)
 	return fre_sect;
 }
 
+u32 mf_scan_fileExist(u8 *path, u8 *szName)
+{
+	FRESULT res;
+	int iRet = 0;
+    res = f_opendir(&dir,(const TCHAR*)path); //打开一个目录
+    if (res == FR_OK) 
+	{	
+		printf("\r\n"); 
+		while(1)
+		{
+	        res = f_readdir(&dir, &fileinfo);                   //读取目录下的一个文件
+	        if (res != FR_OK || fileinfo.fname[0] == 0) break;  //错误了/到末尾了,退出
+	        //if (fileinfo.fname[0] == '.') continue;             //忽略上级目录	
+			if (0 == strcmp(fileinfo.fname, szName)) {
+				printf("%s/", path);//打印路径
+				printf("File is Exist %s\r\n", fileinfo.fname);//打印文件名
+				iRet = 1;
+				break;
+			} 
+		} 
+    }
+
+    return iRet;	 
+}
+
 /**
  * @brief	文件读写指针偏移
  *

FATFS/exfuns/fattester.h

@@ -49,6 +49,8 @@ void mf_gets(u16 size);
 u8 mf_putc(u8 c);
 u8 mf_puts(u8*c);
 
+u32 mf_scan_fileExist(u8 *drv, u8 *szName);
+ 
 #endif
 
 

FATFS/src/ff.c

@@ -2940,6 +2940,7 @@ FRESULT find_volume (	/* FR_OK(0): successful, !=0: any error occurred */
 
 	fs->fs_type = 0;					/* Clear the file system object */
 	fs->drv = LD2PD(vol);				/* Bind the logical drive and a physical drive */
+	printf("disk_initialize\n");
 	stat = disk_initialize(fs->drv);	/* Initialize the physical drive */
 	if (stat & STA_NOINIT) { 			/* Check if the initialization succeeded */
 		return FR_NOT_READY;			/* Failed to initialize due to no medium or hard error */
@@ -3186,8 +3187,10 @@ FRESULT f_mount (
 	}
 	FatFs[vol] = fs;					/* Register new fs object */
 
+	printf("SD 1111 %d opt %d", !fs, opt);
 	if (!fs || opt != 1) return FR_OK;	/* Do not mount now, it will be mounted later */
 
+	printf("SD 222\n");
 	res = find_volume(&path, &fs, 0);	/* Force mounted the volume */
 	LEAVE_FF(fs, res);
 }

Hardware/ESP8266.h

@@ -25,9 +25,9 @@
 #define ADS129x_WIFI_REC_EN				0	//WiFi接收使能
 #define WIFI_REC_LENGTH				1460	//接收缓冲区
 //匿名上位机
-#define WIFI_SEND_LENGTH	330	//发送缓冲区 一帧数据长度39一帧`次采样 33*10 99 39*37=1444
-#define WIFI_QUEUE_LENGTH	(240)	//（队列容量）缓冲区有效数据长度24*3=72   24*37 888
-#define WIFI_QUEUE_SIZE	20	//队列大小
+#define WIFI_SEND_LENGTH	99	//发送缓冲区 一帧数据长度39一帧`次采样 33*10 99 39*37=1444
+#define WIFI_QUEUE_LENGTH	(72)	//（队列容量）缓冲区有效数据长度24*3=72   24*37 888
+#define WIFI_QUEUE_SIZE	50	//队列大小
 /////////////////////////////////////////////////////////////////////////////////////////////
 //发送数据格式
 typedef struct {
@@ -46,43 +46,13 @@ extern  _WIFI_Info *WIFI_Info ; //上传数据结构
 		#define ESP8266_DEBUG(...)		
 #endif
 ////////////////////////////////////////////////////////////////////////////////
-#define AT          "AT\r\n"	
-#define CWMODE      "AT+CWMODE_DEF=1\r\n"		//设置STA模式
-#define CWAUTOCONN	"AT+CWAUTOCONN=1\r\n" //开机进入透传
-#define RST         "AT+RST\r\n"
 
-#define CIPMUX      "AT+CIPMUX=0\r\n"		//设置单链接模式，用于透传，开机默认单链接
-#define CIFSR       "AT+CIFSR\r\n"				//查询本地IP地址，只有连上AP后才能查询，返回OK 或者ERR
-#define CIPMODE   	 "AT+CIPMODE=1\r\n"	//设置透传模式
-#define CIPSEND     "AT+CIPSEND\r\n"	//发送数据，必须开启透传及单链接，换行返回>
-
-//#define ESP_BAUD     	460800	//波特率
-////#define ESP_USARTDEF     "AT+UART_DEF=460800,8,1,0,0\r\n"	//修改波特率	无流控 保存到flash
-//#define ESP_USARTDEF     "AT+UART_DEF=460800,8,1,0,1\r\n"	//修改波特率	使能RTS流控 保存到flash
 
 #define ESP_BAUD     (460800) //(460800) //921600	//波特率
-//#define ESP_USARTDEF     "AT+UART_DEF=921600,8,1,0,0\r\n"	//修改波特率	无流控 保存到flash
-#define ESP_USARTDEF     "AT+UART_DEF=921600,8,1,0,1\r\n"	//修改波特率	使能RTS流控 保存到flash
-
-////////////////////////////////////////////////////////////////////////////////
-//TCP传输需要手动设置 WIFI名称 密码  IP地址 端口
-extern	u8 M8266_CWJAP[60];		//连接AP ssid: xxx  密码：xxx
-extern	u8 M8266_SAVETRANSLINK[60];//保存配网信息
-extern  u8 ESP8266_SET_FLAG;
-
-s16 ESP8266_SendCmd(u8* cmd, u8* result, u16 timeOut);
-s16 ESP8266_SendData(u8* cmd, int iLen);
 
 void ESP8266_IO_Init(void);
-void ESP8266_Goto_Cmd(void);
-void ESP8266_out_Cmd(void);
 void ESP8266_Init(void);
 
-void ESP8266_Config(void);
-
-void ESP8266_SET(void); //配网检测
-void Set_WIFI(void);//配网设置
-
 u8 Wifi_Sendbuf_Init(void);
 
 	 				    

Hardware/Timer.c

@@ -205,6 +205,13 @@ void TIM4_IRQHandler(void)
 				}
 			
 				DS1=!DS1;
+
+				if (1 == CytonSD_GetStatus()) {
+					LED_2 = LED_ON;
+				} else if (2 == CytonSD_GetStatus()) {
+					DS2 = !DS2;
+				}
+				
 				TIM_ClearITPendingBit(TIM4, TIM_IT_Update);//清中断标志
 				
     }     				   

Hardware/key.c

@@ -99,18 +99,18 @@ void Change_Mode(void)
 		if(KEY_TYPE)
 		{
 				//__disable_irq(); 
-				delay_s(2);
+				delay_s(1);
 				LED_2=LED_OFF;
 			
 				if(KEY_TYPE == KEY_PWR)
 				{
 						EXTI->IMR &= ~(ADS129X_DRDY_LINE);//屏蔽外部中断		
 
-						work_state++;
-						if(work_state == 4)
-							work_state=1;
-						
-						//printf("切换工作模式\r\n");
+						//work_state++;
+						//if(work_state == 4)
+						//	work_state=1;
+						CytonEsp12_KeySaveSD();
+						printf("切换工作模式 %d\r\n", work_state);
 				}
 				KEY_TYPE=0;
 		}		

USER/PEIKI.uvoptx

@@ -149,7 +149,7 @@
         <SetRegEntry>
           <Number>0</Number>
           <Key>ST-LINKIII-KEIL_SWO</Key>
-          <Name>-U303030303030303030303031 -I0 -O9422 -S1 -C0 -A0 -N00("ARM CoreSight SW-DP") -D00(1BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8004 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO31 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000 -FP0($$Device:STM32F103C8$Flash/STM32F10x_128.FLM)</Name>
+          <Name>-U303030303030303030303031 -I0 -O9422 -S1 -C0 -A0 -N00("ARM CoreSight SW-DP") -D00(1BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8004 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO31 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128.FLM -FS08000000 -FL020000 -FP0($$Device:STM32F103C8$Flash/STM32F10x_128.FLM)</Name>
         </SetRegEntry>
         <SetRegEntry>
           <Number>0</Number>
@@ -178,14 +178,14 @@
           <Type>0</Type>
           <LineNumber>72</LineNumber>
           <EnabledFlag>1</EnabledFlag>
-          <Address>134234958</Address>
+          <Address>134233810</Address>
           <ByteObject>0</ByteObject>
           <HtxType>0</HtxType>
           <ManyObjects>0</ManyObjects>
           <SizeOfObject>0</SizeOfObject>
           <BreakByAccess>0</BreakByAccess>
           <BreakIfRCount>1</BreakIfRCount>
-          <Filename>C:\Users\Peiki\Desktop\DINGZHI\ADS1299 V2.1\2021-07-11 STM32F103C8  2.3.3锛堝彂璐у浐浠讹級浼樺寲椹卞姩绋嬪簭  閰嶅ADS1299 2.1.0\Hardware\hc05.c</Filename>
+          <Filename>..\Hardware\hc05.c</Filename>
           <ExecCommand></ExecCommand>
           <Expression>\\STM32F103C8T6\../Hardware/hc05.c\72</Expression>
         </Bp>
@@ -194,17 +194,33 @@
           <Type>0</Type>
           <LineNumber>74</LineNumber>
           <EnabledFlag>1</EnabledFlag>
-          <Address>134234970</Address>
+          <Address>134233830</Address>
           <ByteObject>0</ByteObject>
           <HtxType>0</HtxType>
           <ManyObjects>0</ManyObjects>
           <SizeOfObject>0</SizeOfObject>
           <BreakByAccess>0</BreakByAccess>
           <BreakIfRCount>1</BreakIfRCount>
-          <Filename>C:\Users\Peiki\Desktop\DINGZHI\ADS1299 V2.1\2021-07-11 STM32F103C8  2.3.3锛堝彂璐у浐浠讹級浼樺寲椹卞姩绋嬪簭  閰嶅ADS1299 2.1.0\Hardware\hc05.c</Filename>
+          <Filename>..\Hardware\hc05.c</Filename>
           <ExecCommand></ExecCommand>
           <Expression>\\STM32F103C8T6\../Hardware/hc05.c\74</Expression>
         </Bp>
+        <Bp>
+          <Number>2</Number>
+          <Type>0</Type>
+          <LineNumber>217</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>134226424</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\main.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\STM32F103C8T6\main.c\217</Expression>
+        </Bp>
       </Breakpoint>
       <Tracepoint>
         <THDelay>0</THDelay>
@@ -1015,6 +1031,19 @@
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
+    <File>
+      <GroupNumber>7</GroupNumber>
+      <FileNumber>56</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <Focus>0</Focus>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\Cyton\Cyton_SD.c</PathWithFileName>
+      <FilenameWithoutPath>Cyton_SD.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
   </Group>
 
   <Group>
@@ -1025,7 +1054,7 @@
     <RteFlg>0</RteFlg>
     <File>
       <GroupNumber>8</GroupNumber>
-      <FileNumber>56</FileNumber>
+      <FileNumber>57</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <Focus>0</Focus>

USER/PEIKI.uvprojx

@@ -671,7 +671,7 @@
                   <RVCTZI>0</RVCTZI>
                   <RVCTOtherData>0</RVCTOtherData>
                   <ModuleSelection>0</ModuleSelection>
-                  <IncludeInBuild>0</IncludeInBuild>
+                  <IncludeInBuild>1</IncludeInBuild>
                   <AlwaysBuild>0</AlwaysBuild>
                   <GenerateAssemblyFile>2</GenerateAssemblyFile>
                   <AssembleAssemblyFile>2</AssembleAssemblyFile>
@@ -739,7 +739,7 @@
               <RVCTZI>0</RVCTZI>
               <RVCTOtherData>0</RVCTOtherData>
               <ModuleSelection>0</ModuleSelection>
-              <IncludeInBuild>0</IncludeInBuild>
+              <IncludeInBuild>1</IncludeInBuild>
               <AlwaysBuild>0</AlwaysBuild>
               <GenerateAssemblyFile>2</GenerateAssemblyFile>
               <AssembleAssemblyFile>2</AssembleAssemblyFile>
@@ -853,6 +853,11 @@
               <FileType>1</FileType>
               <FilePath>..\Cyton\cyton_cmd_pub.c</FilePath>
             </File>
+            <File>
+              <FileName>Cyton_SD.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\Cyton\Cyton_SD.c</FilePath>
+            </File>
           </Files>
         </Group>
         <Group>